Toshiba TECRA A6 Owner's Manual
Toshiba TECRA A6 Owner's Manual

Toshiba TECRA A6 Owner's Manual

Hide thumbs Also See for TECRA A6:
Table of Contents

Advertisement

This user's manual is designed to let you easily find the information you need
to get the most from your notebook.
• Introduces you to the features of your notebook.
• Gives you useful details on using your notebook.
• Tells you how to look after your notebook, whether at home or traveling.
• Talks about PC Card peripherals and how to use them.
• Goes into more detail about power management and explains how to
conserve power while on the move.
• Introduces you to BIOS, the nervous system of your computer, and how to
change its fundamental settings.
There is no need to read the manual from the beginning to end. Simply find
your way to the section that interests you using the index, or browse through
the manual.
You will come across the following icons in the manual:
Helpful pointers and tricks to get more from your notebook
To help you note and avoid possible damage to your notebook's hardware
or software, or loss of your work
Points out possible damage to property, personal injury or death
Information in this document is subject to change without notice.
© Compal Electronics, Inc. 2006. All rights reserved.
Trademarks used in this document: Microsoft and Windows are registered
trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to
either the entities claiming the marks and names or their products.
About this User's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Toshiba TECRA A6

  • Page 1 About this User’s Manual This user’s manual is designed to let you easily find the information you need to get the most from your notebook. • Introduces you to the features of your notebook. • Gives you useful details on using your notebook. •...
  • Page 3: Table Of Contents

    Contents Safety Instructions..................i Modem Regulatory Notice..............v Specifications..................x Chapter 1 Introducing Your Notebook Front Side ................... 1-1 1.1.1 LCD Module Latch................1-2 1.1.2 Built-in Camera................1-2 1.1.3 Display..................... 1-2 1.1.4 Power Button................... 1-2 1.1.5 Easy Buttons ................... 1-2 1.1.6 Media Office Buttons ............... 1-3 Keyboard ..................
  • Page 4 Chapter 2 Operating Your Notebook Turning Your Notebook On and Off ..........2-1 2.1.1 Turning Your Notebook On .............. 2-2 2.1.2 Turning Your Notebook Off .............. 2-2 2.1.3 Logging Off ..................2-2 2.1.4 Adding User Accounts ..............2-3 2.1.5 Standby Mode ................. 2-3 Tips for Using Windows..............
  • Page 5 Managing Files ................. 2-29 2.8.1 Updating Antivirus Software ............2-30 2.8.2 Backing Up Files ................2-30 2.8.3 Finding Files .................. 2-30 2.8.4 Copying a File on the Hard Drive ..........2-30 2.8.5 Copying a File to a Floppy Disk............. 2-31 2.8.6 Moving Files ..................
  • Page 6 Chapter 5 The Power System Power Management ................5-1 5.1.1 Power Management Modes............. 5-2 5.1.2 Power Options Properties..............5-4 5.1.3 SpeedStep ..................5-6 Battery....................5-7 5.2.1 Battery Performance................ 5-8 5.2.2 Checking the Battery Charge ............5-8 5.2.3 Power Meter ..................5-8 5.2.4 Low-Battery Warning ...............
  • Page 7: Safety Instructions

    Safety Instructions Safety Instructions Use the following safety guidelines to help protect yourself and your computer. General Warnings • Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base.
  • Page 8 Safety Instructions • If the battery pack leaks and the fluid get in your eyes, do not rub them. Instead, rinse your eyes with clean running water and immediately seek medical attention. Otherwise, eye injury may result. • If acid leaking from the battery pack contacts your skin or clothing, immediately wash it away with running water.
  • Page 9 Safety Instructions • Place the AC adapter in a ventilated area, such as a desktop or on the floor, when you use it to run the computer or to charge the battery. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case.
  • Page 10 Safety Instructions Battery Pack Disposal Dispose of the lithium ion battery packs only at approved disposal sites. To − locate an appropriate site, contact the solid waste disposal officials where you live or look for a rechargeable battery recycling website that lists disposal locations near you.
  • Page 11: Modem Regulatory Notice

    Modem Regulatory Notice Modem Regulatory Notice Federal Communication Commission PART 68 Warning This equipment complies with Part 68 of the FCC rules. Located on the bottom side of the modem is a label that contains, among other information, the FCC Registration Number and Ringer Equipment Number (REN) for this equipment.
  • Page 12 Modem Regulatory Notice Important Safety Instructions Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not place this product on an unstable cart, stand, or table.
  • Page 13: Fcc Notice

    Modem Regulatory Notice EMC Regulatory Information This product is designed and tested to comply with the following related EMC (Electromagnetic compatibility) standards. FCC Notice “Declaration of Conformity Information” This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 14 Modem Regulatory Notice Canadian Notice (Canada Only) CE Notice (European Union) EU Declaration of Conformity BSMI Notice (Taiwan Only) Most Compal computer products are classified by the Bureau of Standards, Meteorology and Inspection (BSMI) as Class B information technology equipment (ITE). The symbol that must be marked on the product indicates the product complies with BSMI standard.
  • Page 15 Modem Regulatory Notice BSMI 通告 (僅限於台灣地區) 如果您在電腦的底部、側面或背面板上找到一個 標誌,則適用於以下 部份的相關規定: Macrovision License of Notice This product incorporates copyright protection technology that is protected by methods and claims of certain U.S. patents and other intellectual rights owned by Macrovision Corporation, and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless authorized by Macrovision Corporation.
  • Page 16: Specifications

    Specifications Specifications • Intel Yonah Processors FSB 667 MHz / 2MB L2 • Dual Core / Single Core • Up to Intel’s roadmap Chipset • Intel Calistoga-PM (945PM) for discrete video • ICH7-M • 533/667MHz FSB support Memory • Supports DDR-II 533/667MHz •...
  • Page 17: Pointing Device

    Specifications Select Bay Devices • 5.25” 12.7mm height 24X DVD/CD-RW Combo • 5.25” 12.7mm height 8X DVD-Super Multi devices Options • 512MB/1GB SO-DIMM DDR-II • Li-Ion Battery pack • PCI-E Wireless module • Bluetooth Ver. 2.0 module with USB2.0 interface Pointing Device •...
  • Page 18 Specifications Excellent Power Management Function • Standby mode, Suspend to RAM or Suspend to Disk mode, by time out or by hot key • HDD Local Stand-By mode by time out • LCD Local Stand-By mode by time out • Low battery alarm by beep •...
  • Page 19: Chapter 1 Introducing Your Notebook

    Chapter 1 Introducing Your Notebook...
  • Page 21: Front Side

    1 Introducing Your Notebook 1.1 Front Side The following picture shows the front side of the HGL30 notebook. LCD Module Latch Keyboard Built-in Camera Touch Pad Built-in Microphone Touch Pad Buttons Keyboard Display Device Status Indicators / Power Status Power Button Multiple Digital Media Slot Keyboard Status Lights Wireless Communication Switch...
  • Page 22 1 Introducing Your Notebook 1.1.1 LCD Module Latch The LCD Module Latch secures the display case to your notebook. To open the display, slide the latch to the right and lift the display. When you close the display, the latch secures it automatically.
  • Page 23 1 Introducing Your Notebook 1.1.6 Media Office Buttons Media Office provides Audio / Video recording function to utilize the advantages of array microphone and built-in camera. By operating Media Office buttons, you can enjoy all functions of this application. There are 4 modes in Media Office. Solo: Recording audio in front of the notebook.
  • Page 24: Touch Pad

    1 Introducing Your Notebook 1.1.7 Keyboard ® ® The keyboard includes a numeric keypad and the Microsoft Windows logo key. See 2.3 Keyboard and Touch Pad for details on using keyboard shortcuts. 1.1.8 Keyboard Status Lights Indicates uppercase letter function enabled. Indicates numeric keypad enabled.
  • Page 25: Touch Pad Buttons

    1 Introducing Your Notebook 1.1.10 Touch Pad Buttons The left and right touch pad buttons work as the left/right buttons on a standard mouse. 1.1.11 Finger Printer The finger printer allows you to enroll the computer with registered fingerprint. This recognition device helps prevent unauthorized access by others.
  • Page 26: Multiple Digital Media Card Slot

    1 Introducing Your Notebook 1.1.12 Multiple Digital Media Card Slot Supports one SD/MMC/MS card, which is used in digital still camera and various forms of portable information equipment. 1.1.13 Wireless Communication Switch Turns the wireless communication function on or off. The wireless communication LED on the front panel lights when the function is activated.
  • Page 27: Right Side

    1 Introducing Your Notebook 1.2 Right Side The following picture shows the right side of the HGL30 notebook. Audio Ports USB Ports Optical Media Drive VGA Port...
  • Page 28 1 Introducing Your Notebook 1.2.1 Audio Ports You can connect a headphone or an external speaker to the port and a microphone to the port. The built-in speakers are disabled when a device is connected to the port. 1.2.2 USB Ports Use this port to connect a USB device, such as a mouse, full-size external keyboard, or printer, to the computer.
  • Page 29: Left Side

    1 Introducing Your Notebook 1.3 Left Side The following picture shows the left side of the HGL30 notebook. K-Lock USB Port LAN Jack PC Card Slot Express Card Slot...
  • Page 30 1 Introducing Your Notebook 1.3.1 USB Port Use this port to connect a USB device, such as a mouse, full-size external keyboard, or printer, to the computer. USB is a peripheral expansion standard that supports a data-transfer rate up to 480 Mbps.
  • Page 31: Back Side

    1 Introducing Your Notebook 1.4 Back Side The following picture shows the back side of the HGL30 notebook. S-Video out Port Modem Jack AC Adapter Connector 1-11...
  • Page 32 1 Introducing Your Notebook 1.4.1 S-Video out Port The S-Video out port allows you to connect an external display device, like TV set or device which has S-video port, to the notebook. 1.4.2 Modem Jack The modem jack allows you to connect the notebook to a telephone line with a standard RJ-11 connector.
  • Page 33: Bottom Side

    1 Introducing Your Notebook 1.5 Bottom Side The following picture shows the bottom side of the HGL30 notebook. Battery Pack Battery Release Latch Memory Module Cover HDD Cover Battery Lock Switch Thermal Cover 1-13...
  • Page 34 1 Introducing Your Notebook 1.5.1 Battery Pack With a charged battery pack installed, you can use your notebook without connecting it to an electrical outlet. For more details, see 5.2 Battery. To remove the Battery Pack: 1. Move the Battery Lock Switch to the right (Unlock position). 2.
  • Page 35: Chapter 2 Operating Your Notebook

    Chapter 2 Operating Your Notebook...
  • Page 37: Turning Your Notebook On And Off

    Operating Your Notebook 2.1 Turning Your Notebook On and Off Turning Your Notebook On Turning Your Notebook Off Logging Off Adding User Accounts Standby Mode...
  • Page 38: Turning Your Notebook On

    Operating Your Notebook 2.1.1 Turning Your Notebook On You can configure the computer to start from a specific drive, such as a CD-ROM, an external floppy disk, or even an external device. See Chapter 6 The BIOS Setup Program. Press the power button to turn on your notebook. Do not turn off the computer until the operating system has loaded completely.
  • Page 39: Adding User Accounts

    Operating Your Notebook 2.1.4 Adding User Accounts Different account options are available when a computer is running the Windows XP Professional operating system and is connected to a domain. With Windows XP installed, the system administrator or a user with administrator rights can create additional user accounts: 1.
  • Page 40 Operating Your Notebook...
  • Page 41: Tips For Using Windows

    Operating Your Notebook 2.2 Tips for Using Windows Microsoft Windows XP Help Windows Desktop Start Button Taskbar Notification Area (System Tray) Recycle Bin Control Panel My Computer...
  • Page 42: Microsoft Windows Xp Help

    Operating Your Notebook 2.2.1 Microsoft Windows XP Help For Microsoft Windows XP help, click the Start menu then click the Help and Support icon. The Help and Support Center dialog box opens.
  • Page 43: Windows Desktop

    Operating Your Notebook 2.2.2 Windows Desktop Depending on your notebook setup and software, your desktop may have different or additional shortcuts. See 2.4 Personalizing Your Desktop for more information.
  • Page 44: Desktop Cleanup Wizard

    Operating Your Notebook 2.2.3 Desktop Cleanup Wizard The Desktop Cleanup Wizard moves icons for programs not frequently used to a folder 7 days after you first start your notebook and every 60 days after that. The Start menu's appearance changes as program icons are moved. To turn off the Desktop Cleanup Wizard: Right-click an empty spot on your desktop >...
  • Page 45: Taskbar

    Operating Your Notebook 2.2.5 Taskbar The Start button is on the left and the notification area on the right. Each time you open a program, a button for it appears on the taskbar. To toggle taskbar buttons, click the relevant button.
  • Page 46: Control Panel

    Operating Your Notebook 2.2.8 Control Panel In the Control Panel, you can change how Windows looks and works. Click the Start button and then Control Panel. There are two interfaces - you can choose either Classic View or Category View. You can switch interfaces in the upper left hand window of the Control Panel dialog box.
  • Page 47: Keyboard And Touch Pad

    Operating Your Notebook 2.3 Keyboard and Touch Pad Numeric Keypad Keyboard Shortcuts Windows Logo Key Functions StickyKeys Touch Pad Customizing the Touch Pad Finger Printer 2-11...
  • Page 48: Numeric Keypad

    Operating Your Notebook 2.3.1 Numeric Keypad Keypad numbers and symbols are marked in blue on the lower right edge of the keypad keys. To enable the numeric keypad, press indicator will light when the numeric lock is on. To disable the numeric keypad, press again.
  • Page 49: Windows Logo Key Functions

    Operating Your Notebook Audio Volume Up Media Play/Pause Media Stop Media Play Backward Media Play Forward 2.3.3 Windows Logo Key Functions Opens Windows Explorer Opens the Run dialog box Opens the Search Results dialog box Opens the Search Results - Computers dialog box (when your notebook is connected to a network) Opens the System Properties dialog box To adjust keyboard operation, including character repeat rate, in the Control Panel click...
  • Page 50: Stickykeys

    Operating Your Notebook 2.3.4 StickyKeys The StickyKeys function lets you use the SHIFT, CTRL, ALT, FN keys or the Windows logo key (referred to as modifier keys) in conjunction with other keys by pressing one key at a time instead of simultaneously. To activate StickyKeys mode, press the Shift key five times and then click OK.
  • Page 51 Operating Your Notebook To further customize StickyKeys, click Settings in either of the above dialogue boxes. The following dialogue box will appear. Click Use shortcut to enable the listed shortcut to activate StickyKeys mode. By checking Press modifier key twice to lock, pressing the SHIFT, CTRL, ALT, FN or the Windows logo key twice will 'lock' the key until it is pressed again.
  • Page 52: Touch Pad

    Operating Your Notebook 2.3.5 Touch Pad The Touch Pad responds to the movements and pressure of your finger, allowing you to move the cursor around the screen, in the same way you would with a mouse. Place your fingers on the keyboard in the normal typing position. You can use the Touch Pad by moving either your right or left thumb off the space bar and on to the Touch Pad.
  • Page 53: Finger Printer

    Operating Your Notebook 2.3.7 Finger Printer The finger printer lets you log on to your computer instead of inputting passwords from the keyboard. To raise the recognition success rate, the following illustrations show the correct way to swipe your finger over the finger printer. Align your fingertip with the finger printer as shown in the drawing and swipe.
  • Page 54 Operating Your Notebook 2.3.7.1 Delete the Finger Printer Data Saved fingerprint data is stored in the non-volatile memory inside the finger printer. Fingerprint data are recommended to delete before you hand over the computer the others, or dispose of it. To delete the fingerprint data, do the following: 1.
  • Page 55: Personalizing Your Desktop

    Operating Your Notebook 2.4 Personalizing Your Desktop Choosing a Wallpaper Choosing a Screen Saver Choosing a Desktop Theme Creating a Shortcut on the Desktop 2-19...
  • Page 56: Choosing A Wallpaper

    Operating Your Notebook 2.4.1 Choosing a Wallpaper To make your notebook reflect your style, you can set background colors and patterns, and the wallpaper, on the desktop. Control Panel > Appearance and Themes > Pick a task > Change the desktop background.
  • Page 57: Display

    Operating Your Notebook 2.5 Display Adjusting Brightness Using an External Monitor or Television Setting Display Resolution 2-21...
  • Page 58 Operating Your Notebook 2.5.1 Adjusting Brightness To conserve power when running your notebook from the battery, set the brightness to the lowest comfortable setting using the keyboard shortcuts. Brightness Down Brightness Up 2.5.2 Using an External Monitor or Television When you start your notebook with an external display device such as an external monitor or television attached and turned on, the image may appear on either the display or the external device.
  • Page 59: Networks

    Operating Your Notebook 2.6 Networks To access a network: At the office, you can access a network via the built-in PCI-E LAN. For specific information about connecting to the LAN or WAN, consult your systems administrator. If you are working at home or while traveling, you need a dial-up connection. Ask your system administrator for the telephone number of the network.
  • Page 60 Operating Your Notebook 2-24...
  • Page 61: Managing Programs

    Operating Your Notebook 2.7 Managing Programs Running Programs Adding Software Removing Software 2-25...
  • Page 62: Running Programs

    Operating Your Notebook 2.7.1 Running Programs Programs are any software that process data - like a word processing program or an email program. They require an operating system - like Windows XP - to run on. To run a program, click Start > Programs. Click the program you want to run.
  • Page 63: Removing Software

    Operating Your Notebook 2.7.3 Removing Software Once you've begun removing software, do not interrupt the process. To do so may result in data loss and corruption of your operating system. Start > Control Panel > Add or Remove Programs > Change or Remove Programs. Select the program that you want to remove and click the Change/Remove button.
  • Page 64 Operating Your Notebook 2-28...
  • Page 65: Managing Files

    Operating Your Notebook 2.8 Managing Files Updating Antivirus Software Backing Up Files Finding Files Copying a File on the Hard Drive Copying a File to a Floppy Disk Moving Files Renaming Files Deleting Files Emptying the Recycle Bin Retrieving Files From the Recycle Bin 2-29...
  • Page 66 Operating Your Notebook 2.8.1 Updating Antivirus Software There are thousands of known viruses, and more appear all the time. Installing antivirus software is the only way to protect your data, software, and hardware. Regular updates are necessary to ensure protection. Your computer dealer can advise you regarding purchasing antivirus software.
  • Page 67: Moving Files

    Operating Your Notebook 2.8.5 Copying a File to a Floppy Disk Insert a floppy disk into the external floppy drive. From the Desktop, select My Computer. Locate the file you want to copy, and click the file to select it. Under File and Folder Tasks >...
  • Page 68: Emptying The Recycle Bin

    Operating Your Notebook 2.8.9 Emptying the Recycle Bin Files remain in the Recycle Bin and take up space on the hard drive until you empty them from the Recycle Bin. Files deleted from a floppy disk or from a network are permanently erased. You cannot recover them from the Recycle Bin.
  • Page 69: Playing Cds And Movies

    Operating Your Notebook 2.9 Playing CDs and Movies Inserting Discs Adjusting Volume Adjusting the Picture 2-33...
  • Page 70: Inserting Discs

    Operating Your Notebook 2.9.1 Inserting Discs Be careful not to press down on the drive tray when opening or closing it. When the drive is not in use, keep the tray closed. Do not move the computer when playing CDs or DVDs. To insert a disc, do the following: 1.
  • Page 71: Caring For Your Notebook

    Chapter 3 Caring for Your Notebook...
  • Page 73: Cleaning Your Notebook And Keyboard

    Caring for Your Notebook 3.1 Caring for Your Notebook Cleaning Your Notebook and Keyboard Cleaning the Display Cleaning the Touch Pad Cleaning the CD/DVD Drive Precautions Never spray cleaning products directly onto your notebook's case or display. Only use products designed for cleaning computer displays.
  • Page 74 Caring for Your Notebook 3.1.1 Cleaning Your Notebook and Keyboard Shut your notebook down, turn it off and disconnect it from the electrical outlet and any external devices, such as a printer. Remove the battery packs. Use the brush attachment of your vacuum cleaner, gently remove dust from your notebook's openings and keyboard.
  • Page 75 Caring for Your Notebook 3.1.5 Precautions • Do not spill liquids on the keyboard. If liquid is spilt on the keyboard, turn your notebook off immediately. Leave off overnight to let it completely dry out before using it again. • Do not turn off your notebook if a drive light indicates a drive is active. Turning off your notebook while it is reading from or writing to a disk may damage the disk, the drive, or both.
  • Page 76 Caring for Your Notebook...
  • Page 77: Traveling

    Caring for Your Notebook 3.2 Traveling Identifying Your Notebook Packing Your Notebook Setting a Password Travel Tips If Your Notebook Is Lost or Stolen...
  • Page 78 Caring for Your Notebook 3.2.1 Identifying Your Notebook Attach a nametag or business card to your notebook, or use a permanent marker or stencil to write a unique identifying mark (such as your driver's license number) on the case. Create a file on the Desktop called if found. Place information such as your name, address, and telephone number in this file.
  • Page 79 Caring for Your Notebook 3.2.4 Travel Tips • If you are traveling internationally, carry proof of ownership—or of your right to use the computer if it is company-owned—to speed your passage through customs. Investigate the customs regulations of the countries you plan to visit and consider acquiring an international carnet (also known as a merchandise passport) from your government.
  • Page 81 Chapter 3 Caring for Your Notebook...
  • Page 83 Caring for Your Notebook 3.1 Caring for Your Notebook Cleaning Your Notebook and Keyboard Cleaning the Display Cleaning the Touch Pad Cleaning the CD/DVD Drive Precautions Never spray cleaning products directly onto your notebook's case or display. Only use products designed for cleaning computer displays.
  • Page 84 Caring for Your Notebook 3.1.1 Cleaning Your Notebook and Keyboard Shut your notebook down, turn it off and disconnect it from the electrical outlet and any external devices, such as a printer. Remove the battery packs. Use the brush attachment of your vacuum cleaner, gently remove dust from your notebook's openings and keyboard.
  • Page 85 Caring for Your Notebook 3.1.5 Precautions • Do not spill liquids on the keyboard. If liquid is spilt on the keyboard, turn your notebook off immediately. Leave off overnight to let it completely dry out before using it again. • Do not turn off your notebook if a drive light indicates a drive is active. Turning off your notebook while it is reading from or writing to a disk may damage the disk, the drive, or both.
  • Page 86 Caring for Your Notebook...
  • Page 87: Travel Tips

    Caring for Your Notebook 3.2 Traveling Identifying Your Notebook Packing Your Notebook Setting a Password Travel Tips If Your Notebook Is Lost or Stolen...
  • Page 88 Caring for Your Notebook 3.2.1 Identifying Your Notebook Attach a nametag or business card to your notebook, or use a permanent marker or stencil to write a unique identifying mark (such as your driver's license number) on the case. Create a file on the Desktop called if found. Place information such as your name, address, and telephone number in this file.
  • Page 89: If Your Notebook Is Lost Or Stolen

    Caring for Your Notebook 3.2.4 Travel Tips • If you are traveling internationally, carry proof of ownership—or of your right to use the computer if it is company-owned—to speed your passage through customs. Investigate the customs regulations of the countries you plan to visit and consider acquiring an international carnet (also known as a merchandise passport) from your government.
  • Page 91: Chapter 4 Peripherals

    Chapter 4 Peripherals...
  • Page 93: Pc Cards And Express Cards

    Peripherals 4.1 PC Cards and Express Cards PC Card Types Extended PC Cards Installing a PC Card Removing a PC Card Express Card Types Installing and Removing Express Cards...
  • Page 94: Pc Card Types

    Peripherals 4.1.1 PC Card Types The PC Card slot supports one Type II card. It also supports CardBus technology and extended PC Cards. "Type" refers to the card's thickness, not what it does. A PC Card is not a bootable device. 4.1.2 Extended PC Cards An extended PC Card is longer than a standard PC Card.
  • Page 95: Removing Pc Cards

    Peripherals 4.1.4 Removing PC Cards Before removing a PC Card, stop it running from the configuration utility on the taskbar. Failure to do so could result in data loss. Never try to remove a PC Card by pulling on its cable, if one is attached. Press the release latch.
  • Page 96: Adding And Removing Sd/Mmc/Ms Cards

    Peripherals 4.2 Adding and Removing SD/MMC/MS Cards Before removing a SD/MMC/MS card, stop it running from the configuration utility on the taskbar. Failure to do so could result in data loss. Insert the SD/MMC/MS card into the Card reader slot. To remove the SD/MMC/MS Card, push it in gently and it ejects automatically.
  • Page 97: Memory Modules

    Peripherals 4.3 Memory Modules You can add more memory modules to your computer in order to give it improved performance. To remove a memory module: Remove the two screws securing the memory module cover. Lift off the memory module cover. Pop out the two silver latches holding the memory module into place.
  • Page 99: Chapter 5 The Power System

    Chapter 5 The Power System...
  • Page 101: Power Management

    The Power System 5.1 Power Management Power Management Modes Power Options Properties SpeedStep...
  • Page 102 The Power System Your computer comes with built-in power management. You can configure it, through the Power Options program in the Control Panel, to sleep, hibernate, and wake according to specific pre-defined situations. When leaving your notebook unattended for long periods, place it in standby or hibernate mode.
  • Page 103 The Power System 5.1.1.2 Hibernate Mode In Hibernate mode, power is conserved by system data being copied to the hard drive, and your notebook is completely shut down. When Hibernate mode is exited, your notebook will return to the same operating state it was in before entering Hibernate mode. Hibernate mode can be enabled/disabled in the Power Options Properties window.
  • Page 104 The Power System 5.1.2 Power Options Properties To access the Windows Power Options Properties window: Start > Control Panel > Pick a category > Performance and Maintenance > Power Options 5.1.2.1 Power Schemes Tab The Power schemes pull-down menu in the Power Options Properties displays the selected preset power scheme.
  • Page 105 The Power System 5.1.2.4 Advanced Tab With the Advanced tab you can: Set power icon and standby mode password options. Depending on your operating system, program the following functions by clicking an option from the corresponding pull-down menu, and then clicking OK. Set the computer to Stand by/Hibernate/Do nothing when you close the laptop lid >...
  • Page 106: Speedstep

    The Power System 5.1.3 SpeedStep Your notebook is equipped with SpeedStep technology to better manage power consumption. It changes the processor speed to find the best balance between your computing performance and power consumption needs. Higher speeds enjoy better performance, while slower speeds conserve more power. In Windows XP, the processor's performance level depends on the Power Scheme you select (see 5.1.2 Power Options Properties).
  • Page 107: Battery

    The Power System 5.2 Battery Battery Performance Checking the Battery Charge Power Meter Low-Battery Warning Charging the Battery Removing a Battery Installing a Battery Storing a Battery Working With Extra Battery Packs Maximizing Battery Life...
  • Page 108 The Power System 5.2.1 Battery Performance The performance of the battery can vary, depending on operating conditions. Your battery may last less time if you are running power-intensive programs, playing CDs or DVDs, using PC Cards or have high display-brightness settings. The Power Management Options can be set to alert you when the battery charge is low.
  • Page 109: Removing The Battery

    The Power System 5.2.4 Low-Battery Warning After a low-battery warning, save your work immediately, then connect your notebook to an electrical outlet. Hibernate mode will begin automatically if the battery runs completely out of power. You will hear the low-battery warning when the battery charge is approximately 90 percent depleted.
  • Page 110: Installing A Battery

    The Power System 5.2.7 Installing a Battery Slide the battery into the bay. Press it into place gently but firmly until the latch locks it into place. 5.2.8 Storing a Battery If storing your notebook for an extended period of time, remove the battery. Fully charge the battery before using your notebook again.
  • Page 111: Chapter 6 The Bios Setup Program

    Chapter 6 The BIOS Setup Program...
  • Page 113: Introduction

    The BIOS Setup Program 6.1 Introduction The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make changes to the system configuration and tailor the operation of your notebook to your individual work needs. A ROM-based configuration utility displays the system's configuration status and provides you with a tool to set system parameters.
  • Page 114: Navigating Through The Bios Setup Program

    The BIOS Setup Program 6.2 Navigating through the BIOS Setup Program Accessing the BIOS Setup Program Launching Submenus Saving Changes and Exiting the Setup Program The Setup program has been designed to make it as easy to use as possible. It is a menu driven program, which means you can scroll through the various directories and make your selections among the various predetermined choices.
  • Page 115: Accessing The Bios Setup Program

    The BIOS Setup Program 6.2.1 Accessing the BIOS Setup Program To access the BIOS Setup program, press the [F2] key as soon as the computer starts up and you see the Phoenix BIOS screen. PhoenixBIOS Setup Utility Advanced Security Others Boot Exit Main...
  • Page 116: Launching Submenus

    The BIOS Setup Program To move between menu bar items, use the [◄] and [►] arrow keys until the desired item is highlighted. For example, if you want to move from the Main menu to the Advanced menu, press the right arrow key [►] once. Item Specific Help At the right of the Setup screen, you will notice an item specific help bar.
  • Page 117: The Main Menu

    The BIOS Setup Program 6.3 The Main Menu When the Setup program is accessed, the Information screen appears. It displays the following pieces of information regarding your current system: PhoenixBIOS Setup Utility Advanced Security Others Boot Exit Main Item Specific Help System Time: [19:34:35] System Date:...
  • Page 118 The BIOS Setup Program Power On Display This option is auto-selected. Displays on an external monitor if connected, otherwise it will be displayed on the laptop LCD. Auto-selected: Displays on an external monitor if connected, otherwise, it displays on the laptop LCD. LCD+Analog RGB: Displays on both the laptop LCD and external monitor.
  • Page 119: The Advanced Menu

    The BIOS Setup Program 6.4 The Advanced Menu Selecting Advanced on the menu bar displays the Advanced Menu. Each field on this menu is covered below. PhoenixBIOS Setup Utility Main Security Others Boot Exit Advanced Item Specific Help Legacy USB Support: [Enabled] Execute-Disable Bit Capability: [Disabled]...
  • Page 120: The Security Menu

    The BIOS Setup Program 6.5 The Security Menu The notebook's advanced security system allows you to set a password to prevent unauthorized access to system resources, data, and the BIOS Setup program. This section covers each Security parameter. Selecting Security from the menu bar displays the Security menu.
  • Page 121 The BIOS Setup Program User Password Is / Supervisor Password Is These two fields show that User /Supervisor Passwords are set or not. System Password is set. System Password is not set. Clear Set User Password / Set Supervisor Password Enter this field always shows the message.
  • Page 122 The BIOS Setup Program Built-in HDD Status HDD Password is set. HDD Password is not set. Clear Built-in HDD Password Select For normal user entering HDD password. User Only User+Master Master password must be set first before user password can be configured.
  • Page 123 The BIOS Setup Program Trusted Platform Module Setting PhoenixBIOS Setup Utility Main Advanced Others Boot Exit Security Item Specific Help Trusted Platform Module Setting Security Chip State Enable Deactivated Trusted Platform Support [Disabled] ↑↓ Select Item Help F5/F6 Change Values Setup Defaults ←→...
  • Page 124: The Others Menu

    The BIOS Setup Program 6.6 The Others Menu PhoenixBIOS Setup Utility Main Advanced Security Boot Exit Others Item Specific Help Low Battery Alarm: [Enabled] Panel Close Alarm: [Disabled] System Beep: [Disabled] ↑↓ Select Item Help F5/F6 Change Values Setup Defaults ←→...
  • Page 125: The Boot Menu

    The BIOS Setup Program 6.7 The Boot Menu This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices include the diskette drive in module bay, the onboard hard disk drive and the CD-ROM in module bay.
  • Page 126: The Exit Menu

    The BIOS Setup Program 6.8 The Exit Menu PhoenixBIOS Setup Utility Main Advanced Security Others Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes ↑↓ Select Item Help F5/F6 Change Values Setup Defaults ←→...
  • Page 127 The BIOS Setup Program Load Setup Defaults Allows the user loads default value in CMOS Setup. The following message is prompted when user press [Enter] on this item: Setup Confirmation Load default configuration now? [Yes] [No] Select Yes to confirm or No to abort. You will then return to the setup screen. Discard Changes Allows the user loads previous value in CMOS Setup.

Table of Contents