How To Use The Easywater Dispenser - Zanussi ZRB834NW User Manual

How to use the EasyWater dispenser

Internal components:
2
3
1
1. Water tank
2. Tank lid
3. Valve and gasket
External components:
1
2
3
1. Dispenser
2. Water lever
3. Water drop tray
Initial operations to use your water dispenser
1. Remove every tape and other protection system
from the tank assembly
2. clean the components, as described into "Water
dispenser cleaning procedure", in order to remove
eventual residue.
6
2
1
Water dispenser cleaning procedure
1. Unblock the two stopping elements on the sides of
the tank as shown in the pictures:
– press the stopping elements in the middle and
– move the stopper into direction of the central
2. Push up the tank along the direction of the valve.
3. Remove the lid.
4. Unscrew the valve in counter clockwise (pay par-
ticular attention not to lose the Valve Gasket be-
cause is necessary to a correct functioning of the
features).
5. Clean the tank and the tank lid, the valve and the
gasket with a solution of warm water and neutral
soap. Rinse the valve first and put it inside the door
hole during the cleaning of the other components
(in order to avoid cold air leakage from the fridge).
6. After the tank components cleaning take back the
valve from the fridge door and assembly the tank
in the inverse order (4;3;2;1) of disassembly (pay
attention at the valve gasket positioning ).
7. Put the assembled tank on the door along the valve
direction.
8. Block the stopping elements in the inverse order of
unblock.
move it up
tank.