How To Use The Easywater Dispenser - Zanussi ZRB835NXL1 User Manual

Hide thumbs Also See for ZRB835NXL1:
Table of Contents

Advertisement

Available languages

Available languages

FreeStore
The refrigerator compart-
ment is equipped with a
device that allows for rapid
cooling of foods and more
uniform temperature in the
compartment.
This device activates by it-
self when needed, for ex-
ample for a quick tempera-
ture recovering after door
opening or when the am-
bient temperature is high.
Allows you to switch on the device manually by activating
the Shopping function when needed.
Removal of freezing baskets from the freezer
The freezing baskets have a limit stop to prevent their ac-
cidental removal or falling out. At the time of its removal

How to use the EasyWater dispenser

Internal components:
1. Water tank
2. Tank lid
3. Valve and gasket
External components:
1. Dispenser
2. Water lever
3. Water drop tray
Initial operations to use your water dispenser
1. Remove every tape and other protection system from
the tank assembly
2. clean the components, as described into "Water dis-
penser cleaning procedure", in order to remove even-
tual residue.
8
Downloaded from Fridge-Manual.com Manuals
2
3
1
1
2
3
from the freezer, pull the basket towards yourself and,
upon reaching the end point, remove the basket by tilting
its front upwards.
At the time of putting it back, slightly lift the front of the
basket to insert it into the freezer. Once you are over the
end points, push the baskets back in their position.
Water dispenser cleaning procedure
1. Unblock the two stopping elements on the sides of
the tank as shown in the pictures:
– press the stopping elements in the middle and
move it up
– move the stopper into direction of the central tank.
2. Push up the tank along the direction of the valve.
3. Remove the lid.
4. Unscrew the valve in counter clockwise (pay particu-
lar attention not to lose the valve gasket because is
necessary to a correct functioning of the features).
5. Clean the tank and the tank lid, the valve and the gas-
ket with a solution of warm water and neutral soap.
Rinse the valve first and put it inside the door hole
2
1

Advertisement

Table of Contents
loading

Table of Contents