Controlling The Various Dab Functions 3 - Teac CX-400iDAB Owner's Manual

DRC value
Use this option to set the Dynamic Range Control (DRC) value
to be applied to received broadcasts. DRC is used to reduce
the range between high and low volumes of audio and is
sometimes applied at the broadcast source. Pop music might
have a high value of DRC applied, appropriate for constantly
high listening levels, while classical music broadcasts might
have no DRC applied to allow the listener to hear the full
dynamic range of the source volume.
There are three values of DRC you can apply.
0 : None
1/2 : Medium
1 : Maximum
While listening to a DAB broadcast press the DISPLAY
1
button.
Select 'DRC value' using the SKIP button (
2
Press the SELECT button.
3
The current option is displayed in the first line of the display.
Select the desired level of DRC in the second line of the
4
display using the SKIP button (
Press the SELECT button.
5

Controlling the Various DAB Functions 3

or ).
or ).
Sw version (Software version)
This option shows the version number of the installed
software. This is for information only and no adjustment is
available.
While listening to a DAB broadcast press the DISPLAY
1
button.
Select 'Sw version' using the SKIP button (
2
Signal strength display
You can check the signal strength of the current station.
In DAB mode, press the SELECT button.
The signal strength indicator appears.
To return to the standard display, press the button again
or press the INFO button. In addition, if the unit is put into
standby mode by pushing the STANDBY/ON button, the
standard displaywill reappear the next time that the power is
turned on.
or ).
27