Controlling The Various Dab Functions 1 - Teac CX-400iDAB Owner's Manual

In DAB mode, each time the DISPLAY button is pressed, the
Function Control is changed as follows.
Station order
Manual tune
Autoscan local
Autoscan full
DRC value
Sw version
Station order
Use station order to set the order in which stations are listed.
There are four orders: Favourite, Alphanumeric, Active and
Prune.
While listening to a DAB broadcast press the DISPLAY
1
button.
Select 'Station order'using the SKIP button(
2
Press the SELECT button.
3
The current option is displayed in the first line of the display.

Controlling the Various DAB Functions 1

or ).
Select the desired option in the second line of the
4
display using the SKIP button (
Press the SELECT button.
5
Fav station (Favourite station)
As you tune in stations and listen to them the unit will
memorize the top ten stations you listen to and list them at
the top of the service list.
Alphanumeric
This is the default order. Stations are listed by name with
numbers first and then alphabetically by letters in the station's
name.
Active station
This option will list active stations at the top of the service list
and stations that are in the list but have no service in your area
to be listed last in the service list.
Prune stations
This option will list active stations and remove any stations
that are in the list but have no service in your area from the
service list. Those invalid stations in the service list have a
question mark (?) displayed in front of the station name.
Select Prune stations and press the SELECT button. All
stations that have a question mark will be deleted from
the service list.
or ).
25