Ac Power Cord - Teac CX-400iDAB Owner's Manual

A SPEAKERS terminals
Connect the left speaker's plug to L, and the right speaker's
plug to R.
Make sure to connect the white wire to the
the black wire to the
Do not connect anything other than the supplied speakers
to these terminals.
VIDEO OUT jack
B
This terminal outputs video signal from iPod.
Use an RCA (pin) video cable to connect the Dock to the
composite video connector of a television or monitor.
Note for Docking an iPod to this system
iPod video output
Make the following settings on your iPod's menu to output
video to a TV via this system's dock.
In the [Video] menu, select [Video Settings]. Set [TV OUT] to
[On] or [Ask].
If you have set [TV OUT] to [Ask], your iPod prompts you
each time you play a video to specify whether to output it to
a TV.
NOTE:
If you output video to a TV from your iPod, the video is not
displayed on the iPod's screen.
iPod touch does not contain this menu. You will have to
specify whether to a output video to a TV each time you
play it.
AUX IN jack
C
You can connect a portable audio player to this jack.
Connect the LINE OUT or PHONES jack (audio output jack)
of the player using the supplied stereo mini plug cable.
When using the PHONES jack of your mini player, you must
adjust the volume of the mini-player or you may hear no
sound from your CX-400iDAB.
D SUBWOOFER PREOUT jack
Connect the AUDIO IN cable of the subwoofer to this jack.
E DC IN
Connect the "DC OUT" calbe of the subwoofer to the "DC
IN12V" jack.
After connecting the connection, attach the connection
cover to avoid the connection coming out.
8
terminal and
terminal.
F POWER switch of the Subwoofer
Use this switch to turn the system on or off.
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
To avoid loosing your settings, it is advisable to keep this
switch ON even when not in use.

AC Power Cord

G
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
Hold the power plug when plugging or unplugging the
power cord. Never pull or yank on the power cord.
DAB/FM antenna
H
Extend the antenna into a "T" shape, find the best position
for reception and attach it to a window frame or wall
with thumbtacks or the like. This antenna may need to be
repositioned if you move your unit to a new location.
For DAB reception, you can check the antenna adjustment
or positioning for the best reception by viewing the signal
strength on the display (page 26).