Controlling The Various Dab Functions 1 - Teac MC-DX40DAB Owner's Manual

In DAB mode, each time the DISPLAY button is pressed, the Function
Control is changed as follows.
Station order
Manual tune
DRC value
Preset select
Preset save
SW version
Station order
Use station order to set the order in which stations are listed.
There are four orders: Favourite, Alphanumeric, Active and Prune.
1 While listening to a DAB broadcast press the DISPLAY
button.
2 Select "Station order" using the skip button(. or /).
3
Press the SELECT button.
The current option is displayed in the first line of the display.

Controlling the Various DAB Functions 1

x
x
x
x
x
x
SELECT
DISPLAY
.//
4 Select the desired option in the second line of the display
using the skip button (. or /).
5 Press the SELECT button.
Fav station (Favourite station)
As you tune in stations and listen to them the unit will memorize
the top ten stations you listen to and list them at the top of the
service list. A Favourite station in the service list has " " displayed
after the station name.
Alphanumeric
This is the default order. Stations are listed by name with numbers
first and then alphabetically by letters in the station's name.
Active station
This option will list active stations at the top of the service list and
stations that are in the list but have no service in your area to be
listed last in the service list.
Prune stations
This option will list active stations and remove any stations that
are in the list but have no service in your area from the service
list. Those invalid stations in the service list have a question mark
(?) displayed in front of the station name.
Select Prune stations and press the SELECT button. All
stations that have a question mark will be deleted from the
service list.
q presets
This option takes your top ten Favourite stations and assigns
them to preset numbers 1–10.
This option is only available after "Fav Station" option has been
turned on. See above.
1