Controlling The Various Dab Functions 2 - Teac CX-400iDAB Owner's Manual

Manual tune
This option allows you to manually tune in a channel and
view a continuously updated display of the strength of the
signal. This may be useful when adjusting or positioning an
antenna for better reception.
While listening to a DAB broadcast press the DISPLAY
1
button.
Select 'Manual tune'using the SKIP button (
2
Press the SELECT button.
3
Press the SKIP button (
4
you want to listen to.
Press the SELECT button when the channel you wish to
5
tune in is displayed in the second line of the display.
The current signal strength and the required level indicator are
displayed.
current signal strength
The signal strength should meet this required level indicator to
tune in the station.
26

Controlling the Various DAB Functions 2

or
or ) to select the station
required level indicator
6 While viewing the indicator, adjust or reposition the
antenna until the best reception is indicated.
7 Press the SELECT button to cancel Manual tune and
resume normal reception.
Local scan (Auto scan)
The unit will scan the DAB bands between 10A to 13F and add
the channels found to the channel list.
).
In DAB menu mode, select "Autoscan local" (page 23).
1
Press the SELECT button.
2
You can also activate the "Autoscan local" by using the AUTO
SCAN button (page 23).
Full scan (Auto scan)
The unit will scan all the DAB bands between 5A to 13F and add
the channels found to the channel list. Try this If you want to
search stations internationally or if "Local Scan" does not find
the channels you want.
In DAB menu mode, select "Autoscan full" (page 23).
1
Press the SELECT button.
2
You can also activate the "Autoscan full" by using the AUTO
SCAN button (page 23).