Advertisement
FUELING
WARNING : Use only water-clear kerosene (paraffin).
1. Open the fuel tank lid on the top of heater cabinet and lift out
the removable fuel tank. Turn the removable tank upside
down and remove the fuel tank cap.
2. Insert the straight tube of the manual siphon into the
jerrycans; insert the siphon's flexible hose into the removable
fuel tank opening.
3. Turn the air vent knob on the top of the siphon clockwise to
close the vent. Start the flow of kerosene (paraffin) by
squeezing the bulb of the siphon vigorously six or seven
times. Once flow begins, it is no longer necessary to squeeze
the bulb.
4. Check the removable tank fuel gauge while filling the tank.
Stop filling by loosening the switch button on top of the
pump (turn anti-clockwise), once the gauge indicates that the
tank is full. Never overfill the tank, especially not when the
fuel is very cold (fuel expands when it heats up).
NOTE : Be careful to avoid overfilling the tank, especially with
very cold kerosene (paraffin). Overflow might occur
due to expansion when the fuel warms up.
5. Remove the siphon carefully, allowing excess kerosene
(paraffin) to drain from the tube back into the jerrycans.
Replace fuel tank cap and tighten it securely. Be sure to wipe
away any spilled kerosene (paraffin) from tank and other
heater parts.
6. After making sure fuel tank cap is tightly fastened, invert tank
and replace into heater body.
Never use gasoline or other flammable
liquids.
ALWAYS extinguish heater before refill
heater fuel tank.
Fuel heater outside the living area.
4
empty
full
Hide quick links:
Advertisement
