Toyotomi Laser Clean LC-41 Instruction Manual page 10

AUTOMATIC CLEANING MODE
When the heater has been burning continuously for two hours at its highest setting, the
burner will automatically start an autoclean procedure. The display will show the
autocleaningcode running back to . The procedure takes 5 minutes, during
which the heater will burn at its lowest setting, while the burner autocleans. When the
burner is clean again, the heater will automatically switch back to the highest setting
again.
TURNING OFF HEATER
While heater is burning, press power switch to
"OFF" position. This will extinguish heater
and ON/OFF Lamp on the indicator panel will
go out.
The circulation fan motor will operate further,
for approximately 90 seconds to assist in
cooling down heater.
NEVER : Turn heater off by disconnecting the heater plug from the main elecrical
supply.
DO NOT : Restart your heater for at least ten minutes.
AUTOMATIC DEACTIVATION
This heater is fitted with a safety system that ensures that it
swiches off automatically after 69 hours continuous operation.
The following will then appear in the display: . If desired,
you can switch the heater on again by pressing the button.
9