Setting The Time And Date - Miele G 7893 Operating Instructions Manual

Programmable functions

Setting the time and date

The serial interface contains the date and time. This data is transmitted to the
report printer.
You can reset the date and time, e.g. to change from summer to winter time.
The individual values of date and time are activated according to the position of
the programme selector:
"1 o'clock" position: Calendar day 01 - 31
"2 o'clock" position: Month
"3 o'clock" position: Year
"4 o'clock" position: Hours
"5 o'clock" position: Minutes
If the serial interface has not been activated, a - will appear in the display for each
programme selector position when Level E34 is selected.
Step
^ Press 0 repeatedly or hold it pressed in until
E34 appears in the display.
Wait approx. 30 seconds before carrying out the
next step.
^ Turn the programme selector to the position of the
value you want to change, e.g. the "4 o'clock"
position to change the hours.
^ Press ß repeatedly or hold pressed in until the
required value appears in the display, e.g. 1 x.
The new values will be transmitted to the serial interface after the values have
been saved and you have come out of the programming mode.
For this reason, wait approx. 30 seconds before switching off the
washer-disinfector.
42
01 - 12
00 - 99 = 2000 - 2099
00 - 23
00 - 59
Display / Result
E34
The control unit is reading
the current values.
10
11