Operation; Setting The Local Language; Setting Current Time And Date - Miele WS 5071 Operating Instructions Manual

Operation

Setting the local language*

(if necessary)
To set the local language the programming
mode must be accessed by pressing simulta-
neously on the Mains on switch Y and the
Start button X. Normally German and one
other language are available.
Switch on the on-site mains switch.
Turn the key switch to position "B" (Oper-
ation).
Press the OFF button Z to switch off the
machine.
Press the Start button X and the ON but-
ton Y at the same time and hold pressed
in, until the Display shows the following:
SETTING LOCAL LANGUAGE
DEUTSCH
After selection press Start button.
Select the required language with the Cur-
sor buttons 1 2 .
The display content being shown is imme-
diately converted into the language se-
lected .
Confirm with the Start button X .
The complete display contents are
converted into the language selected.
M.-Nr. 05616270
>ENGLISH<

Setting current time and date*

Switch the machine off with the Mains off
switch Z .
Turn the key switch to position "B".
Press the Delay start button W and the
ON button Y at the same time, and hold
pressed in, until the Display shows the fol-
lowing:
SETTING TIME AND DATE
Time of day
Date
After selection press Start button.
Use the Cursor button 2 to position the
cursor on the input field for hours and set
the hours with the Plus or Minus button 4
3.
Use the Cursor button 2 to position the
cursor on the input field for minutes and
set the minutes with the Plus or Minus but-
ton 4 3.
Position the Cursor on Day and set the
day with the Plus or Minus button 4 3.
Position the Cursor on Month and set the
month.
Position the Cursor on Year and set the
year.
Store in memory with the Start button X .
If the Delay start button W is pressed dur-
ing a running programme the current time
of day and date are shown.
*Pauses between programming steps must not last
longer than 25 seconds, otherwise the display returns
to the basic stage, (such as On) and the changes are
not stored in memory.
12
>14< : 30 hrs
23. 03. 2000