Setting The Time And Date - Miele G 7883 Operating And Installation Instructions

Programming functions

Setting the time and date

The date and time are set in the serial interface (optional accessory). This
information appears in the print log.
The date and time can be changed, e.g., from daylight saving to standard time.
Use the program selector to activate the desired time and date:
1 o'clock position: Calendar day 01 - 31
2 o'clock position: Month
3 o'clock position: Year
4 o'clock position: Hours
5 o'clock position: Minutes
When level E34 is selected without an activated serial interface, a "-" appears in
the display for all program selector positions.
Step
^ Press and hold the "Drying" 0 button until E34
appears in the display.
Wait approximately 30 sec before the next step.
^ Switch the program selector to the position for the
value you wish to change, e.g., to the 4 o'clock
position to set the hour.
^ Press and hold the "Display" ß button until the
required value appears in the display, e.g., 1 x.
Wait approximately 30 sec before turning off the
machine.
Once the values are saved and you have exited the programming mode, the
updated values are transmitted to the interface. Therefore wait about 30
seconds before switching off the machine.
46
01 - 12
00 - 99 = 2000 - 2099
00 - 23
00 - 59
Display / Result
E34
The control unit retrieves the
currently stored values.
10
11, the hour is changed.
The updated values are
transmitted to the serial
interface.