Rinse-Aid Dispensing - Electrolux Diva EDW 2000 Service Manual

7.3 Rinse-aid dispensing

Rinse-aid dispensing can be disabled by the user by pressing a combination of buttons. The rinse-aid
LED (if present) also shuts off:
1. Turn on the appliance by pressing the S0 button
LED LD0 lights up
The appliance is automatically set to the selection mode
2. Simultaneously press and hold down the S1 and S2 buttons:
LED LD0 is lit
LEDs LD1, LD2 and LD3 begin to flash, which shows the machine will accept new programming
3. Press the S2 button to call up this function:
LED LD0 is lit
LED LD2 continues to flash
LEDs LD1 and LD3 turn off
the display shows the current setting
0d, function enabled
1d, function disabled
4. Press the S2 button to toggle the function:
LED LD0 is lit
LED LD2 continues to flash
the display shows the current setting
0d, function enabled
1d, function disabled
5. To store the new setting:
Shut off the appliance using the S0 button
Wait 60 seconds
LED LD0 is lit
All the indicators on the control panel shut off
SOI/TD - PR 36 599 35 94-03