Sanitising; Eco-Drying; Delayed Start - Electrolux Diva EDW 2000 Service Manual

This option is not available in the "Short Intensive", "Intensive Maximum Speed", "Short", "Short 30 min.",
"Soak", "Dish Heating" and "Crystal Ware" cycles.
3.3.4

Sanitising

This special option sanitises the dishes and is not compatible with the "Crystal Ware" cycle.
During the final hot rinse, a temperature of 68ºC is maintained for 10 minutes
If selected during the Soak cycle, a special "sanitising" programme lasting 46 minutes is performed
(involving a hot rinse at 68 ºC; this temperature is then maintained for 10 minutes)
3.3.5

Eco-drying

This option is temporarily selected by pressing the relative button. It is available in all programmes
with at least 15 minutes of drying time (excluding "Short Intensive", "Short", "Short 30 min", "Soak" and "Dish
Heating"):
Drying time is reduced to only 15 minutes
"Energy Label" programmes are shorted by 39 minutes; all other programmes are shortened by 9
minutes
3.3.6

Delayed start

This option enables the user to delay the start of the washing cycle for a minimum time of 1 hour to
a maximum time of 19 hours from the moment the option is set. The appliance must not be turned off during
the countdown.
Selecting delayed start after the programme has been selected:
1. Turn the appliance on by pressing button S0
LED LD0 lights up
The appliance is set to the selection mode
All the programme buttons and options are now available
After the desired programme is selected, options can still be chosen as long as they are
compatible with the selected programme
2. Press the button for the desired programme:
LED LD0 is lit
The LED for the selected programme lights up to show that the selection has been made
The display lights up and the time remaining (from beginning to end of cycle) flashes
LED LD10 lights up
LEDs LD11, LD12, LD13, LD14 light up to indicate the phases that make up the programme
3. Press delayed start button S7 within 3 seconds from the moment the programme is selected:
LED LD0 is lit
The LED for the selected programme is lit
LED LD7 indicating delayed start is lit
The display flashes the delayed start time
LEDs LD11, LD12, LD13, LD14 light up to indicate the phases that make up the programme
SOI/TD - PR 8 599 35 94-03