5.13.1 "Turbo-dry" drying
On some models, a forced-air drying
system is used. Steam is drawn in by a fan
inside the upper duct and then ducted towards
the condenser in the fill tank, from where it
returns to the tub via the steam venting ring.
The fan motor (MV) is powered by triac
TY6 (connector D3 on the main board) through
the start switch (PU) and the door switch (IP).
The drying time is variable and pre-defined for
each washing cycle.
In some programmes, the fan operates
for around 20 minutes even after the end of the
cycle. It shuts off (and will not restart) when the
door is opened.
SOI/TD - PR
29
599 35 94-03