Maintenance - Sharp FU-A80A Operation Manual

MAINTENANCE

CLEANING THE FILTERS
1
Turn off the unit, and unplug the
power cord.
2
Remove the Front Panel.
(Refer to E-6)
3
Clean the filter and Dust sensor.
Gently remove dust from the filter, using a
vacuum cleaner with attachment or similar tool.
Dust sensor
Active Carbon Deodorizing Filter
Dust Sensor
Remove the Sensor cover, and remove the
dust on the Sensor filter.
If it is very dirty, wash it with water and
thoroughly.
OP_FU-A80A-EN+HK.indb 8 OP_FU-A80A-EN+HK.indb 8
Care Cycle :
Whenever dust accumulates on the unit or every 1 month.
Sensor cover
Sensor filter
dry it
E-8
CLEANING THE UNIT
Wipe with a dry, soft cloth.
For stubborn stains or dirt, use a soft cloth
dampened with warm water.
Do not use volatile fluids and
detergents.
Benzene, paint thinner, polishing powder,
detergent ingredients etc., may damage
the unit.
9/21/11 2:43:11 PM 9/21/11 2:43:11 PM