Aerial Reception Settings (Tuner); Auto Channel Setting - Sony RDR-HX750 Operating Instructions Manual

Power Save
Selects whether this recorder is in power save
mode when the power is turned off (standby).
On No antenna input signals are
output when the recorder is in
standby.
Off Does not set to power save
mode. Normally, select this
setting.
b
Note
Power Save mode does not function in the
following cases, even when "Power Save" is set to
"On."
– Synchro-Recording is set.
HELP Setting
On
Displays Help information for
GUI displays.
Off Does not set to HELP setting
mode.
Easy Setup (Resetting the Recorder)
Select this to run the "Easy Setup"
programme.
1
Select "Easy Setup" in "Basic," and press
ENTER.
2
Select "Start," and press ENTER.
3
Follow the instructions for "Easy Setup"
(page 22) from step 2.
98
Aerial Reception
Settings (Tuner)
The "Tuner" setup helps you to make tuner
and programme position settings for the
recorder.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "Initial Setup," and press
ENTER.
3
Select "Tuner," and press ENTER.
The "Tuner" setup appears with the
following options. The default settings
are underlined.
To turn off the display, press SYSTEM
MENU.

Auto Channel Setting

You can preset programme positions
automatically.
1
Select "Auto Channel Setting" in
"Tuner," and press ENTER.
2
Select "Next Screen," and press ENTER.
3
Select your country/region using </,,
and press ENTER.
The programme position order will be set
according to the country/region you set.
If any programme positions are unused
or contain unwanted channels, you can
disable them (page 99).