Recording From Connected Equipment; Recording From Connected Equipment With A Timer (Synchro Rec.) - Sony RDR-HX750 Operating Instructions Manual

Recording from
Connected Equipment
HDD
z REC
x REC
STOP
Recording from connected
equipment with a timer
(Synchro Rec.)
HDD
You can set the recorder to automatically
record programmes from connected
equipment that has a timer function (such as
a satellite tuner). Connect the equipment to
the LINE 1 IN jacks of the recorder
(page 26).
When the connected equipment turns on, the
recorder starts recording a programme from
the LINE 1 IN jacks.
The recording destination is HDD only.
1
Press REC MODE repeatedly to select
the recording mode.
For details about recording mode, see
page 40.
2
Select the desired audio signal when
recording a bilingual programme.
Set "External Audio" to "Bilingual" and
"Bilingual Recording" to "A/L" or "B/R"
in the "Audio In" setup (page 103).
For details about the bilingual recording,
see page 41.
[/1
3
Set the timer on the connected
DVD
equipment to the time of the
programme you want to record, and
INPUT
turn it off.
4
Press down x REC STOP on the
recorder for more than 3 seconds.
The SYNCHRO REC indicator lights up
</M/m/,,
in the front panel display and the recorder
ENTER
turns off. The recorder is ready to start
Synchro-Recording.
You can also set the recorder to stand by
for Synchro-Recording by setting
"Synchro Rec." of "Timer Recording" to
REC MODE
"Yes" from the System Menu.
To cancel Synchro Rec before recording
starts
Press [/1.
The SYNCHRO REC indicator in the front
panel display turns off.
To cancel Synchro Rec during recording
Press down z REC for more than 3 seconds.
The Synchro Rec is cancelled, and the
recording continues.
To stop recording
Press x REC STOP. Then select "Yes" in the
confirmation display, and press ENTER.
b
Notes
• The recorder starts recording only after detecting
a video signal from the connected equipment. The
beginning of the programme may not be recorded
regardless of whether or not the recorder's power
is on or off.
• The Synchro Rec function does not work with
some tuners. For details, see the tuner's operating
instructions.
• To use the Synchro Rec function, you must first
set the recorder's clock correctly.
• For a bilingual programme, only the audio signal
selected in step 2 can be played back.
47
,continued