HELP Setting
On
Displays Help information for
GUI displays.
Off
Does not set to HELP setting
mode.
Easy Setup (Resetting the
Recorder)
Select this to run the "Easy Setup" program.
Follow the instructions for "Easy Setup"
(page 25) from step 2.
Antenna Reception
Settings (Tuner)
You can make tuner and channel settings for
the recorder.
Auto Channel Setting
Automatically presets the receivable
channels. The recorder can receive VHF
channels 2 to 13, UHF channels 14 to 69,
and unscrambled CATV channels 1 to 125.
Select "Antenna" or "Cable," and press
ENTER.
"Antenna"(Default): Presets VHF and UHF
channels.
"Cable": Presets cable TV channels.
The channel order will be set.
If any channels are unused or contain
unwanted channels, you can disable them
(page 100).
b
Note
You cannot preset channels for the connected
cable box or satellite receiver.
99
,continued