Recorder; Changing Programme Positions Of The Recorder Using The Remote - Sony RDR-HX750 Operating Instructions Manual

2
With TV [/1 pressed down, enter the
TV's manufacturer code using the
number buttons.
For instance, to enter "09," press "0" then
"9." After you enter the last number,
release the TV [/1 button.
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
Manufacturer
Sony
Hitachi
JVC
Panasonic
Philips
Samsung
Sanyo
Thomson
Toshiba
The remote performs the following:
Buttons
TV [/1
TV 2 (volume)
+/–
TV PROG +/–
TV t (input
select)
Code number
01 (default)
24
33
17, 49
06, 08
71
25
43
38
Operations
Turns your TV on or
off.
Adjusts the volume
of your TV.
Selects the
programme position
on your TV.
Switches your TV's
input source.
If you have a Sony DVD player
or more than one Sony DVD

recorder

If the supplied remote interferes with your
other Sony DVD recorder or player, set the
command mode number for this recorder and
the supplied remote to one that differs from
the other Sony DVD recorder or player after
you have completed "Step 6: Easy Setup."
The default command mode setting for this
recorder and the supplied remote is DVD3.
You can check the current Command Mode
in the front panel display. For details, see
page 114.
The default command mode setting for this
recorder and the supplied remote is DVD3.
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
Changing programme positions
of the recorder using the
remote
You can change programme positions of the
recorder using the number buttons.
Number
buttons
Example: for channel 50
Press "5," "0," then press ENTER.
ENTER
21