Sony RDR-HX750 Operating Instructions Manual page 113

4:3 Video Output
This setting is effective only when you set
"TV Type" to "16:9" in the "Playback" setup.
Adjust this setting to watch 4:3 aspect ratio
signals. If you can change the aspect ratio on
your TV, change the setting on your TV, not
this recorder.
Note that this setting is effective only for
HDMI connection.
Full Select this when you can
change the aspect ratio on
your TV.
Normal Select this when you cannot
change the aspect ratio on
your TV. Shows a 4:3 size
video with the aspect ratio
as it is.
16:9 aspect ratio TV
Colour
Selects the method of outputting video
signals for the HDMI jack.
RGB (0-255) Outputs RGB (0-255)
signals. Select this when
connecting to an RGB (0-
255) device.
RGB (16-235) Outputs RGB (16-235)
signals. Select this if
colours appear overly rich
and the black appears too
deep.
YCbCr 4:2:2 Outputs 10-bit YCbCr
4:2:2 component signals.
YCbCr 4:4:4 Outputs 8-bit YCbCr
4:4:4 component signals.
b
Notes
• Some settings may not be available depending on
the connected device.
• When a DVI device is connected, you cannot
select "YCbCr 4:2:2" or "YCbCr 4:4:4."
• When "Screen Resolution" is set to "720 x 576i"
(or "720 x 480i") in the "HDMI Output" setup,
you cannot select "YCbCr 4:2:2."
Audio Output
Selects the type of audio signal output from
the HDMI OUT jack.
Auto Outputs Dolby Digital,
MPEG and DTS audio
signals as a bitstream
signal. Normally select
this position.
PCM Converts all audio signals
except for DTS signals to
PCM.
Bitstream
Select this if the
Priority
connected device is
compatible with bitstream
audio.
b
Notes
• The PCM signals may not be output even when
you select "Auto" depending on the "Audio Out"
settings, number of audio channels, and the
HDMI-connected device.
• The "Audio Output" function is not available
when a DVI device is connected.
HDMI Control
On Allows you to use the
HDMI control features
(page 17).
Off
Turns off the function.
113