When the timer settings overlap
The programme that starts first has priority
and the second programme starts recording
only after the first programme has finished.
will be cut off
When the recordings start at the same
time
The programme that is set last has priority. In
this example, timer setting B is set after A, so
the first part of timer setting A will not be
recorded.
When the end time of one recording and
the start time of another are the same
After finishing the previous recording, the
other recording may be delayed.
To scroll the list display by page (Page
mode)
Press
while the list display is turned
/
on. Each time you press
, the entire
/
Timer List changes to the next/previous page
of timer settings.
To turn off the Timer List
Press TIMER LIST or O RETURN.
z Hint
While recording, you cannot modify the timer
setting for the current recording, but you can extend
the duration of the recording time (page 38).
b
Notes
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
• Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. “
” will appear next to the overlapped
setting in the Timer List. Check the priority order
of the settings.
Recording from connected
equipment without a timer
You can record from a connected VCR or
similar device. To connect a VCR or similar
device, see “Connecting a VCR or Similar
Device” on page 20. Use the DV IN jack on
the front panel if the equipment has a DV
output jack (i.LINK jack).
1
Insert a recordable DVD.
See “1. Inserting a Disc” on page 23.
2
Press INPUT SELECT to select an input
source according to the connection
you made.
The front panel display changes as
follows:
programme
position
3
Select the desired audio signal when
recording a bilingual programme to
the DVD-RWs/DVD-Rs (VR mode).
Press OPTIONS to select “Line Audio
Input,” and press ENTER. Then select
“Bilingual,” and press ENTER.
For details about bilingual recording, see
page 36.
4
Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode, see
page 35.
5
Insert the source tape into the
connected equipment and set to
playback pause.
6
Press z REC.
This recorder starts recording.
7
Press the pause (or play) button on the
connected equipment to cancel the
playback pause status.
The connected equipment starts playback
and the playback image is recorded by
this recorder.
To stop recording, press x REC STOP
on this recorder.