Part Description; Parts And Maintenance; Related Documentation - Ingersoll-Rand 2934 Series Parts Information

Model 2934B9 Air Impact Wrench with No. 2934A90 Angle Attachment
102
103
111
113
(Dwg. TPC357-1)
The 2934 Series Air Impact Wrench can be furnished with a 1" square drive 2934A90 Angle Attachment and when so furnished is designated
as 2934B9. Following are the parts used only in the 2934B9. All parts not listed are the same as for a 2934 Series Air Impact Wrench with Inside
Trigger Handle, Side Spade Handle and a 1" square drive standard length Anvil.
Item

Part Description

100 Hammer Case Assembly
101 Hammer Case Bushing
* Hammer Case Label
Angle Attachment Assembly
102 Angle Housing Assembly
103 Grease Fitting
104 Bevel Pinion Assembly
105 Retainer Plunger
106 Retainer Plunger Spring
107 Bevel Pinion Bearing or Bevel Gear
Bearing (2)
108 Bevel Pinion Spacer
* Not illustrated.

Parts and Maintenance

When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so
that they can be recycled.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.

Related Documentation

For additional information refer to:
Air Impact Wrench Product Safety Information Manual 04580916.
Air Impact Wrench Product Information Manual 04584835.
Air Impact Wrench Maintenance Information Manual 04584298.
Manuals can be downloaded from www.ingersollrandproducts.com.
4
110
107
106
105
104
108
112
107
Part Number
2934-A827
2934-641
WARNING-2-99
2934A90
436A90-A600
130SR-188
436A90-A602
8U-715
5UHD-718
436A90-593
436A90-608
116
117
119
115
118
114
115
109
Item Part Description
109 Bevel Pinion Driver
110 Bevel Pinion Clamp Washer (4)
111 Bevel Gear
112 Bevel Gear Spindle
113 Bevel Gear Bearing Retainer
114 Angle Housing Connector
115 Connector Lock Pin (2)
116 Connector Retaining Sleeve
117 Retaining Sleeve Spring
118 Connector Retaining Sleeve Stop
119 Connector Retaining Ball (3)
* Socket Retainer
101
100
Part Number
2934A90-563
808-207
436A90-601
436A90-607
436A90-632
436A90-680
436A90-609
436A90-681
436A90-682
3BM-303
8U-722
RR10015S
04584447_ed3