Advertisement
Quick Links
Instruction Manual
Triple Head DisplayPort Multi Monitor Adapter
SP123DP
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
The SP123DP Triple Head (DisplayPort) Graphics Expansion Module
is an external multi-monitor spanner/splitter that lets you add up
to 3 displays to a desktop or laptop PC, from a single DisplayPort
output.
Output a single-mode DisplayPort signal to span across 3 monitors
as a single panoramic display at resolutions up to 3840x1200 or
clone (mirror) your primary display, using this device as a 3-port
DisplayPort video splitter.
Packaging Contents
• 1 x DisplayPort Multi Monitor Adapter
• 1 x Power Adapter
• 1 x Instruction Manual
System Requirements
• DisplayPort enabled computer system/video card
• DisplayPort enabled monitor/display device
• Available AC electrical outlet
• DisplayPort cables (male/male)
Installation
1. Make sure the computer system and monitors/display devices are powered off.
2. Using a standard DisplayPort cable, connect the Multi-Monitor Adapter to the DisplayPort connector on the Host computer system.
3. Connect the DisplayPort monitor/display device(s) into the numbered connectors on the Multi-Monitor Adapter. Make sure to connect
the monitor/display device(s) in order from 1 to 3 (do not skip ports).
4. Connect the included power adapter to the Multi-Monitor Adapter.
5. Power on the monitor/display device(s).
6. Turn on the Host computer system.
7. The operating system will automatically detect the Multi-Monitor Adapter and either clone/mirror a single image on all displays, or span
an image across all displays.
8. To change the display setting/mode, change the display resolution via the operating system's display properties. To use Clone Mode, set
the display resolution to equal or less than the maximum resolution of the smallest connected display. Set the display resolution higher,
to use Span Mode.
For the most up-to-date information, please visit: www.startech.com
Front View
Rear View
DisplayPort
connector (input)
DC Power connector
*actual product may vary from photos
DisplayPort connector (output)
Manual Revision: 10/27/2011
Advertisement
Related Manuals for StarTech.com SP123DP
Summary of Contents for StarTech.com SP123DP
-
Page 1: Front View
DC Power connector DisplayPort connector (output) • DisplayPort cables (male/male) Installation 1. Make sure the computer system and monitors/display devices are powered off. 2. Using a standard DisplayPort cable, connect the Multi-Monitor Adapter to the DisplayPort connector on the Host computer system. 3. Connect the DisplayPort monitor/display device(s) into the numbered connectors on the Multi-Monitor Adapter. Make sure to connect the monitor/display device(s) in order from 1 to 3 (do not skip ports). 4. Connect the included power adapter to the Multi-Monitor Adapter. 5. Power on the monitor/display device(s). 6. Turn on the Host computer system. 7. The operating system will automatically detect the Multi-Monitor Adapter and either clone/mirror a single image on all displays, or span an image across all displays. 8. To change the display setting/mode, change the display resolution via the operating system’s display properties. To use Clone Mode, set the display resolution to equal or less than the maximum resolution of the smallest connected display. Set the display resolution higher, to use Span Mode. For the most up-to-date information, please visit: www.startech.com Manual Revision: 10/27/2011... -
Page 2: Supported Video Resolutions
• Consult the dealer or an experienced radio/TV technician for help. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Need help?
Do you have a question about the SP123DP and is the answer not in the manual?
Questions and answers