Connection; General Information - Xoro HRT 7500 User Manual

Connecting to an Aerial and TV

General information

•
Assure that the device is switched off and unplugged.
•
Read the manual of your TV and attend to the safety instructions.
•
Please establish an accurate connection.
•
Please check the video output settings. If your TV has a SCART input, choose CVBS/RGB
in "Setup -> TV System -> Video output.
The schematic
shows the connection of the
HRT 7500 to the antenna
and the TV
1. Connect a SCART (or HDMI) cable to the DVB-T receiver.
2. Connect the aerial cable to the aerial input (ANT IN) of the HRT 7500.
3. Connect the power cable and the plug to the wall outlet.
4. Switch on your DVB-S receiver and the TV
5. Choose the correct input SCART (or HDMI) at your TV
Note:
By using the loop through connector you can connect for example a second DVB-T Receiver.
12
picture

Connection

HRT 7500