Connection - Xoro HRK 7555 User Manual

Connecting to an Aerial and TV
General information
Assure that the device is switched off and unplugged.
Read the manual of your TV and attend to the safety instructions.
Please establish an accurate connection.
Please check the video output settings. If your TV has a SCART input, choose CVBS/RGB
in "Menu -> Picture -> Video Output.
The schematic picture shows the connection
of the HRK 7555 to the cable and the TV
CATV cable
1. Connect a SCART (or HDMI) cable to the DVB-C receiver.
2. Connect the CATV cable to the aerial input (CABLE IN) of the HRK7555.
3. Connect the power cable and the plug to the wall outlet.
4. Switch on your DVB-C receiver and the TV
5. Choose the correct input SCART (or HDMI) at your TV
Note:
By using the loop through connector you can connect for example a second DVB-C Receiver.

Connection

HRK 7555
11