Setting The Time - Polar Electro Protrainer NV User Manual

Principle IV. To use the various functions of
a basic selection, press the
button to move from function to
S TOP
function within each of the four selections.
Principle V. Once you have entered the
selection, using the
button (one digit flashing on display), the
SELECT button assumes a different role. Now
the SELECT button enables you to program
single digits within a function, while the
button cycles you between the
START/STOP
functions under
SET
through the functions, using th e
button, the flashing of one
START/STOP
single digit stops and the
assumes it's original role enabling you to return
to the selection cycle.
P R O G R A M M I N G
Y O U R P O L A R
P R O T R A I N E R N V H R M
• T I M E •
What does this selection do ?
In the basic mode it shows you the time of day
and the date. It also allows you to set the
correct time, the date and an alarm. You can
light up the display in the dark by pressing the
SIGNAL/LIGHT button.
12
SET/START/
SET
SET/START/STOP
SET/
selection. Having cycled
SET/
SELECT button
Why might you use this selection ?
To set the correct time or date when you take
the Wrist Receiver into use for the first time, or
to change the time if you travel to other time
zones. You may use the alarm function to wake
you up, or as a reminder.
S T E P - B Y - S T E P I N S T R U C T I O N S
F O R S E T T I N G T H E T I M E
1. Time of day being displayed
on the face of the Wrist Receiver,
press the SET /START/STOP
but ton. The word
appears at the top of the
display, and the AM or PM
indicator is flashing.
Note: At any point you can
press
SET/START/STOP
button once more to go to the
alarm setting.
2. Press the
SELECT
PM.
3. When the correct choice appears on the
display, press the STORE/LAP
lock in your selection.
TIME
PROTRAINER NV
PM
PM
STORE/LAP
button to select AM or
button to
13