Setting Time Of Day - Polar Electro S120 User Manual

8. In 12 h time mode: Scroll up or down to select AM/ PM. Press OK.
In 24 h time mode: Skip this step.
If you want to activate the 12h time mode, see "Setting Time
of Day", below.
9. Hours start to blink. Scroll up or down to set the correct hour.
Press OK.
10. Minutes start to blink. Scroll up or down to set the correct
minute. Press OK.
Press Stop to return to WATCH SET. Press and hold Stop to return
to the Time of Day display.

Setting Time of Day

(If you start from Time of Day display, repeat steps 1 - 3.)
4. WATCH SET is displayed.
5. Press OK. Scroll up or down until TIME1/ TIME2 is displayed.
6. Press OK. TIME1 or TIME2 starts to blink. Scroll up or down to
select time 1 or 2.
7. Press OK. 12h/ 24h starts to blink. Scroll up or down to select
12h or 24h time mode. Press OK.
8. In 12 h time mode: Scroll up or down to select AM/ PM. Press OK.
In 24 h time mode: Skip this step.
9. Hours start to blink. Scroll up or down to set the correct hour.
Press OK.
10. Minutes start to blink. Scroll up or down to set the correct
minute. Press OK.
Number 2 in the lower right corner of the Time of Day display
indicates that Time 2 is in use.
Press Stop to return to WATCH SET. Press and hold Stop to return
to the Time of Day display.
21
21