Advertisement
Do not abuse the cord. Never use the cord to carry the tools or pull
the plug from an outlet. Keep cord away from heat, oil, sharp edges
or moving parts. Replace damaged cords immediately. Damaged cords
increase the risk of electric shock.
When operating a power tool outside, use an outdoor extension cord
marked "W-A" or "W". These cords are rated for outdoor use and reduce
the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use the tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long
hair. Keep your hair, clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure that the switch is OFF before
plugging in the tool. Carrying tools with your finger on the switch or
plugging in tools that have the switch on invites accidents.
Remove adjusting keys or wrenches before turning the tool on. A
wrench or a key that is left attached to a rotating part of the tool may result
in personal injury.
Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enable better control of the tool in unexpected
situations.
Use safety equipment. Always wear eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate
conditions.
Before connecting the tool to a power source (receptacle, outlet,
etc.), be sure that the voltage supplied is the same as that specified
on the nameplate of the tool. A power source with voltage greater than
that specified for the tool can result in serious injury to the user, as well as
damage to the tool.
TOOL USE AND CARE
Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the work by hand or against your
body is unstable and may lead to loss of control.
10-06-17 manual 241-0972 En.indd
6
6
2010-6-18
12:00:03
Hide quick links:
Advertisement
Need help?
Do you have a question about the 5” RANDOM ORBIT SANDER and is the answer not in the manual?
Questions and answers
i need dust bags for sander,,,help...241-0972
The manual does not specify where to purchase dust bags for the Performax 5” Random Orbit Sander (part number 241-0972). However, the dust bag is listed as an included accessory. You may check with Menards® retail stores, as they handle warranty replacements for this tool.
This answer is automatically generated