Attaching The Video Camera Recorder To The Marine Pack - Sony Handycam MPK-TRV2 Operating Instructions Manual

Marine pack
Hide thumbs Also See for Handycam MPK-TRV2:
Table of Contents

Advertisement

Available languages

Available languages

Attaching the video camera recorder to the marine pack

1
Remove the lens cap, shoulder strap, filter, etc.,
from the video camera recorder.
Attach the wide conversion lens (not supplied).
3
By attaching the wide conversion lens, the shooting
coverage becomes wider, and the subject size
becomes smaller.
5
When using adaptor A, attach it to the video
camera recorder.
Check that the position of the mounting screw plate
is correct. (See pages 6 and 7.)
When using adaptor B, skip this step.
6
Adjust the video camera recorder.
Refer to the operation manual of your video camera recorder.
1
Set the POWER
switch to CAMERA.
CAMERA
The following adjustments are needed when your video camera
recorder has the corresponding function.
Refer to the operation manual of the video camera recorder for details.
White balance
Normally set to w (outdoor).
Set to e (indoor) for night diving.
Shutter speed
Set where no indicator appears.
Program AE
Set where no indicator appears.
Brightness
Turn off the indicator.
Attach a charged battery pack and insert a video
2
cassette.
Attach the Viewfinder adaptor.
4
If the viewfinder adaptor is loose when it is attached,
bend the eyecup of the camcorder and attach it again.
2
Set the STANDBY
switch to STANDBY.
On some video camera recorder
models, you cannot adjust the focus
with the button on the marine pack.
Set the focus to auto focus mode (see
page 2).
Sony MPK-TRV2 (EN,F,E,P) 3-859-264-2X
(continued)
9

Advertisement

Table of Contents
loading

Table of Contents