Taking Pictures And Video Clips; Taking Pictures; Using The Digital Zoom; Setting The Flash - Jenoptik JDC 3.0S User Manual

TAKING PICTURES AND VIDEO CLIPS

TAKING PICTURES AND VIDEO CLIPS

TAKING PICTURES

1. Power on the camera.
2. Set the camera to Single capture mode (
3. Frame your subject with the LCD or viewfinder.
• For better results, stand at least 1.5m away from the subject.
4. Hold the camera still and press the Shutter button to take the
picture.

USING THE DIGITAL ZOOM

The camera provides up to 4x digital zoom.
1. Press the button to zoom in. The digital zoom indicator will be
shown on the LCD.
2. Press the to zoom out or return to the normal mode.
Important:
1. Hold your camera steady when using Digital Zoom to prevent
blurred pictures, caused by jittery movement. It is recommended
to either place your camera on a steady surface or mount it on a
tripod.
2. The image quality may degrade slightly with Digital Zoom.

SETTING THE FLASH

By default, the flash is set at Off mode. When taking pictures at night, indoor, or outdoor in heavy
shadows, you may press the Flash button to turn the Flash on.
Press the Flash button repeatedly until the desired indicator appears
on the LCD.
• When the flash is under charging, the Flash icon on the LCD will
blink and the blue Flash Ready LED will light. When the flash is full
charged, the Flash Ready LED will turn off. Please wait until the
flash stops blinking before proceeding to take pictures.
Flash Mode
Off
Auto Flash
Fill Flash
Flash Fires
In this mode, the flash will not fire, regardless of the lighting condition.
The camera judges if a flash is required. If the environment is too dark, the
flash will fire.
Flash will fire in any lighting condition.
). (p. 8)
9
Shutter button
Power button
Review button
Zoom out
Zoom In
Flash button