Kenwood CK 408 Instructions For Use Manual page 23

INSIDE OF OVEN
– The oven should always be cleaned
after use when it has cooled down.
– The cavity should be cleaned using a
mild detergent solution and warm
water.
– Suitable proprietary chemical cleaners
may be used after first consulting with
the manufacturers recommendations
and testing a small sample of the
oven cavity.
– Abrasive cleaning agents or scouring
pads/cloths should not be used on
the cavity surface.
NOTE: The manufacturers of this appli-
ance will accept no responsibility for
damage caused by chemical or abrasive
cleaning.
Do not store flammable material in
the oven.
ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
– Fit the side runner frames into the
holes on the side walls inside the
oven (fig. 8.3).
– Slide in, on the guides, the shelf and
the tray etc. fig. 8.4.
The rack must be fitted so that the
safety catch, which stops it sliding
out, faces the inside of the oven (fig.
8.4).
– Dismantle in reverse order.
Fig. 8.3
Fig. 8.4
23