Setup; Audio Setup; Audio Setup Operation; Setting The Balance/Fader/Subwoofer - Alpine ICS-X7 Owner's Manual

Setup

Audio Setup

Audio Setup Operation

The parking brake must be engaged to access the Setup screen.
Attempting to access this screen while driving will display the
warning-Unable to operate while driving.
The following steps 1 to 5 are common operations to each
"Setting item" of Audio Setup. Refer to each section for details.
1
Touch [Setup] on the Home screen.
The Setup main screen is displayed.
2
Touch [Audio Setup].
The Audio Setup screen appears.
3
Select the desired item.
If " " appears, there is next hierarchy. Touch the desired
item.
If " " does not appear, proceed to step 4.
Setting items: Balance/Fader/Subwoofer / Application Volume
Setup / Media Xpander / Bass Max EQ / Download
Sound Setting / Defeat / Time Correction / X-OVER
/ Parametric EQ
4
Touch [ ] or [ ] etc., to change its setting.
5
Touch [ ] to return to the main application screen.
Touch [ ] to return to the previous screen.
• Immediately after changing the Audio Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to "Selecting an
Item in a List" (page 16).

Setting the Balance/Fader/Subwoofer

[Balance/Fader/Subwoofer] is selected on the Audio setup menu in
step 3. Refer to "Audio Setup Operation" (page 21).

Adjusting the Balance/Fader

Touch the desired point within the image area. Or touch
[ Front] [ Rear] [
Balance: L15 to R15
Fader: F15 to R15
• To reset to the initial setting (Balance: 0, Fader: 0), touch [Center].

Turning Subwoofer ON/OFF

If an optional subwoofer is connected to the unit, make the following
setting.
Setting item: SubW.
Setting contents: On / Off (Initial setting: Off)

Adjusting the Subwoofer Level

You can set the Subwoofer level when a Subwoofer is connected.
Setting item: SubW. LEVEL
Setting contents: 0 to 15 (Initial setting: 0)
• If the Subwoofer setting is "Off," the setting cannot be set.

Setting the Subwoofer Phase

The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Setting item: SubW. Phase
Setting contents: 0° / 180° (Initial setting: 0°)
• If the Subwoofer setting is "Off," the setting cannot be set.

Setting the Volume for Each Application

[Application Volume Setup] is selected on the Audio setup menu in
step 3. Refer to "Audio Setup Operation" (page 21).
The volume level for each application can be adjusted.
Setting item: Radio / Compress Media / MirrorLink / iPod Music /
iPod Video / AUX / AUX3 / BLUETOOTH Audio / aha
Setting contents: -14 to +14 (Initial setting: 0)
• Settable applications differ depending on the connected device and
settings.
Image area
Left] [Right ].
21
-EN