Miele Steam Oven Operating Instructions Manual page 83

Problem
The p symbol
appears in the
display and an
audible tone may
sound.
The heating-up
phase lasts an
unusually long time.
k and a number
between 1 and 10
appear in the
display.
"0:22h" and k flash.
Possible cause and remedy
The water container has not been pushed into the
appliance properly.
^ Remove the water container and push it back in so that
it connects.
There is insufficient water in the water container. The
water level must be between the two markings.
^ Fill the water container.
The water container needs to be descaled, because it is
not set correctly for the hardness of the local water
supply.
^ Set the correct water hardness level for your water
supply (see "Settings"), and descale the appliance as
described in "Cleaning and care / Descaling".
If the water hardness level was in fact set correctly or the
problem occurs again, contact the Service Department.
The appliance needs to be descaled.
^ Proceed as described in "Cleaning and care -
Descaling".
Problem solving guide
83