Miele Steam Oven Operating Instructions Manual page 82

Steam oven
Table of Contents

Advertisement

Problem solving guide
Problem
The fan can still be
heard after the
appliance has been
switched off.
The water container
has become harder to
put into the appliance
and take out again.
After moving house
the appliance no
longer switches from
the heating-up phase
to the cooking phase.
During operation an
unusually large
amount of steam
escapes, or steam
escapes from parts of
the steam oven where
it does not usually.
After a period of time,
the door makes a
noise when it is
opened and closed.
82
Possible cause and remedy
The appliance is fitted with a fan which removes steam
from the oven. The fan continues to run even after the
appliance has been switched off. It will switch itself off
automatically after a while.
The coupling seal in the water container has become
stiff.
^ Lightly lubricate the coupling seal on the water
container with silicone grease, as described in
"Cleaning and care / Water container / Coupling seal".
The boiling temperature of the water has changed as
the altitude of the new location for the appliance differs
from the old one by at least 300 m.
^ To adjust the boiling temperature, descale the
appliance (see "Cleaning and care - Descale").
The door is not properly closed.
^ Close the door.
The door seal is not correctly fitted.
^ Press it in all the way round the door to make sure it is
fitted evenly.
The door seal is damaged, e.g. cracks can be seen.
^ Replace the door seal.
^ Lubricate the hinges with the silicone grease
supplied.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg 6010

Table of Contents