Before Setting Surface Controls - Kenmore 790.7943 Use & Care Manual

Before Setting Oven Controls
Baking Layer Cakes with 1 or 2 Oven Racks
For best results when baking cakes using 2 oven racks, place cookware on oven rack positions 2 (flat or offset) & 5 (flat).
For best results when using a single oven rack, place cookware on oven rack position 5 (See Fig. 1 and Fig. 2 on page 9).
Air Circulation in the Oven
For best air circulation and baking
results allow 2-4" (5-10 cm) around
the cookware for proper air circulation
and be sure pans and cookware do not
touch each other, the oven door, sides
or back of the oven cavity. The hot air
must be able to circulate around the
pans and cookware in the oven for
even heat to reach around the food.
Fig. 1 Fig.2

Before Setting Surface Controls

Control Locations of the Gas Surface Burners
Ther SIMMER Burner is best used for simmering
delicate sauces, etc. This burner is located at the
right rear burner position on the cooktop.
The STANDARD Burners can be used for most
surface cooking needs. These burners are
located at the left front and center positions on the
cooktop.
The POWER Burners are best used for bringing
large quantities of liquid rapidly up to temperature
or when preparing larger quantities of food. These
burner are located at the right front and left rear
positions on the cooktop.
Left Left Right Right
Front Rear Front Rear
Burner Burner Burner Burner
Fig. 3
10