NEC MultiSync LT 100 User Manual page 37

Projecting Slides
Orientation of flash memory card insertion
The flash memory card has a front and a back side and the flash
memory card is designed to be inserted in only one orientation. The
card is designed so that it cannot be inserted in reverse. Trying to
force the card into slot may result in damage to the card and the
PCMCIA card slot. See the flash memory card manual for informa-
tion about the orientation of the flash memory card.
* The type of flash memory card required for use in the projector is
a Type II PCMCIA-ATA flash memory card. Never use a different
type of card, doing so may result in damage to the card or PC card
slot.
4. Select a file or a slide.
Use the mouse pad (+) or (–) button on the remote control to
select the file or slide you want to display and press the Enter
button on the cabinet or the Left Click button on the remote con-
trol. See the following pages for more details.
Multi Cursor
1 2
3
File
File File
5 6 7
File File
File
* The selected file or slide will be displayed.
NOTE: If you select "Start" and press the Enter button on the
cabinet or the Left Click button on the remote control, the slides
will be looped. To use the Start feature, you must first set on the
software included with the LT Viewer board.
Table Cursor
4
File
B
A C
presentation presentation
presentation presentation
8
File
F
E G
presentation presentation
presentation presentation
OPERATION
To Project the Slides (the presentation materials)
1. Insert a flash memory card into the PC card slot.
* To eject the flash memory card, press the Eject button.
NOTE: Should the card be difficult to insert, do not forcefully
push the card in.
2. Select the PC card as a source.
* Press the Menu button on the remote control or projector cabi-
net and select "PC CARD" from the Source menu.
* If there is no flash memory card in the card slot, the projector
displays a blue back or black back image.
3. Select "Select File" or "Select Slide".
* Use the mouse pad (+) or (-) button on the remote control to
select "Select File" or "Select Slide".
NOTE: The mouse pad (+) or (–) button is valid only when the
Menu button is lit.
D
H
71
72