NEC MultiSync LT 100 User Manual page 33

Brightness
Use the "Adjust" (+) or (–) buttons to adjust the brightness.
Contrast
Use the "Adjust" (+) or (–) buttons to adjust the contrast.
Color*
Use the "Adjust" (+) or (–) buttons to adjust the color.
Tint*
Use the "Adjust" (+) or (–) buttons to adjust the tint.
Sharpness*
Use the "Adjust" (+) or (–) buttons to adjust the sharpness.
White Balance
Use the Mouse pad (+) or (–) buttons to adjust the white balance.
For Video/RGB ... Brightness for each color (RGB) is used to adjust the black level of the screen; Contrast for each
For Y/Cb/Cr ........ Brightness for each color (Y/Cb/Cr) is used to adjust the white level of the screen; Contrast for
Alignment
Use the Mouse pad (+) or (–) buttons to adjust the horizontal and vertical position, "Picture", and "Fine Picture".
Horizontal
Vertical
Auto Picture
Use the "Adjust" (+) button to turn this feature on so "Picture" and "Fine Picture" adjustments are made automati-
cally. Use the "Adjust" (–) button to turn this feature off so you can make "Picture and Fine Picture" adjustments
manually.
Picture Adjustment
Use this icon with the "Fine Picture Adjustment" to fine tune the computer image or to remove any vertical banding that might
RGB AUTO PICTURE ON
appear. This function adjusts the clock frequencies to eliminate the vertical banding in the image. Press the "Adjust" (+) and (–)
buttons until the banding disappears. This adjustment may be necessary when you connect your computer for the first time. This
adjustment is made automatically when the Auto Picture is turned on.
RGB AUTO PICTURE OFF
Fine Picture
Use this icon to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident when
part of your image appears to be shimmering.) Use the "Adjust" (+) and (–) buttons to adjust the image. Use the Fine
Adjustment only after the Picture Adjustment is complete. This adjustment is made automatically when the Auto
Picture is turned on.
NOTE:
color (RGB) to adjust the white level of the screen.
each color (Y/Cb/Cr) to adjust the black level of the screen.
Position ........ Use the "Adjust" (+) button to move the image right; (–) to move it left.
Position ........ Use the "Adjust" (+) button to move the image up; (–) to move it down.
(when AUTO PICTURE is off)
(when AUTO PICTURE is off)
Color, Tint, and Sharpness controls will not work with an RGB source. The Tint control will not work with a PAL
or SECAM source. The Color and Tint controls will work with a Y/Cb/Cr source.
Alignment controls such as Horizontal and Vertical position controls, and Picture, Fine Picture and Auto Picture
adjustments will not work with a Video or S-Video source.
OPERATION
63
64