Multiple Handset Use; Handset Locator; Join A Call In Progress - AT&T CL82113 User Manual

Multiple handset use

Multiple handset use

Handset locator

The handset locator feature is useful if you misplace
any handsets.
To start the paging tone:
• Press HANDSET LOCATOR on the telephone
/
base to start the paging tone on all handsets for
60 seconds.
NOTE: If you press
handset, the ringer of that handset stops, but the paging to
the rest of the handsets continues.
To stop the paging tone:
• Press PHONE/
dialing key (0-9, TONE
-OR-
• Press HANDSET LOCATOR on the telephone base.
/

Join a call in progress

When a handset is already on a call and you would like to join the call, press
PHONE/
FLASH
To end the call using a handset, press
in the telephone base or charger. The call does not end until all handsets
hang up.
NOTE: You can use up to four system handsets at the same time on an outside call.
OFF/
CANCEL
, /SPEA�ER SPEA�ER, or any
FLASH
or #) on the handset(s).
/SPEA�ER SPEA�ER on your handset.
or
or MUTE/ on a
DELETE
OFF/
CANCEL
29
**Paging**
or place the handset