Telephone settings
Handset settings
NOTE: If in the future, your telephone service provider requires you to dial ten digits to
make a local call (area code plus telephone number), you need to delete your home
area code and dial out locally from the call ID log. With the home area code displayed,
press and hold
The home area code is now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/
2. Use
q
or
CID
/SELECT.
MENU
3. Use
q
or
CID
/SELECT.
MENU
4. Use
or
q
CID
/SELECT. There is a confirmation tone and the
press
MENU
screen returns to the previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU/
2. Use
q
or
CID
/SELECT.
MENU
/DELETE until the digits are deleted, and then press
MUTE
in idle mode to enter the main menu.
SELECT
to scroll to Settings, then press
p
DIR
p
to scroll to Dial mode, then press
DIR
to highlight Touch-tone or Pulse, then
p
DIR
in idle mode to enter the main menu.
SELECT
to scroll to Web address, then press
p
DIR
20
/SELECT.
MENU
Home area code
>Dial mode
DIAL MODE
>Touch-tone
Settings
Web address
>
www.telephones.
att.com