Multiple handset use
Push-to-talk (PTT)
You can directly broadcast messages to the speakerphone of
any handset. Press and hold PUSH TO TAL� on a handset to
begin two-way communication.
•
Only one handset can talk at a time. To do so,
press and hold PUSH TO TAL�.
You must release PUSH TO TAL�, so the other person can respond.
•
•
Only one PTT session can be active at a time.
•
While PTT is in use between two handsets, other handsets cannot use the
intercom feature but can access the answering system.
•
When you attempt to place a PTT call to another handset which is
accessing the answering system or on an intercom call or outside call,
your handset screen shows Not available at this time.
NOTE: The PTT function is not available when QUIET mode is on.
Turn PTT on or off
1. Press PUSH TO TAL� when the handset is not in use. The
PUSH TO TAL� menu displays.
2. Press q
or p
CID
/SELECT.
MENU
3. Press q
or p
CID
/SELECT.
MENU
NOTE: The handset screen displays No Incoming PTT when PTT is turned off.
to highlight PTT On/Off, then press
DIR
to choose On or Off, then press
DIR
33
PTT
PUSH TO TALK
>PTT On/Off