Table of Contents
Advertisement
Setting
Options
DRC (Dynamic Range
Off
Control)
On
• This affects such audio signals as Dolby Digital.
• Depending on the file, the effect may be weak.
Dual Mono
1CH
2CH
1CH+2CH
Speaker Setup
Adjust the Delay (distance from viewers) of the speakers.
(SBX-N700 only)
Please see "Adjust speaker settings" for more details (page 50).
Subwoofer Setup
Wireless
(SBX-N700 only)
Built in
Color Space
RGB
YCbCr
YCbCr 422
Full RGB
Resolution
Auto
480I/576I
480P/576P
720P
1080I
1080P
HDMI Audio Out
Bitstream
PCM
Off
HDMI Deep Color
30bits
36bits
Off
When [30bits] or [36bits] is selected, set the color space to a setting other than YCbCr 422.
HDMI 1080P 24Hz
On
Off
Control
On
Off
HDMI Standby Mode
On
Off
Explanation
Select this to output audio signals without using the DRC function.
Select this to adjust the range between the loudest and softest sounds
(dynamic range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
When multiple audio signals are input to TV (ARC) or an optical input, the
main audio is selected.
When multiple audio signals are input to TV (ARC) or an optical input, the sub
audio is selected.
When multiple audio signals are input to TV (ARC) or an optical input, the
main audio and sub audio are selected.
Select this to use the wireless subwoofer.
Select this to use the built-in subwoofer.
Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
Select this to output the video signals as YCbCr 4:4:4 signals.
Select this to output the video signals as YCbCr 4:2:2 signals.
Select this to output the video signals as RGB signals. Choose this if the
colors seem too dense and all the dark colors are displayed in a uniform
black.
Select this to choose the resolution of the video signals output from the HDMI
OUT terminal automatically.
Output the video signals from the HDMI OUT terminal with the selected
resolution.
Select this to output HDMI audio signals directly.
Select this to output HDMI audio signals converted to PCM audio signals.
Select this when you do not want to output the audio signal from the HDMI
output terminal.
Select this when outputting the video signals with 30-bit color.
Select this when outputting the video signals with 36-bit color.
Select this when outputting the video signals with normal 24-bit color.
Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
Select this to control the unit with the remote control of a TV connected with
an HDMI cable or the HDMI audio return channel (ARC). Also refer to "Control
with HDMI function" (page 44).
Select this to not control the unit with the remote control of a TV connected
with an HDMI cable.
The Control with HDMI function can be used even when the unit is in standby
mode.
The Control with HDMI function cannot be used when the unit is in standby
mode.
Advanced settings
47
En
5
Hide quick links:
Advertisement
Table of Contents
