Pioneer SBX-N700 Easy Setup Manual

Easy Setup Guide
Before installing and setting up the unit, make sure you have all of the accessories (
Connect the power cords to an outlet after you have nished all of the connections.
Connecting to your TV, player, and other devices
Connecting to an ARC-compatible TV
Connect to your TV using an HDMI cable (commercially available).
Connect to the ARC HDMI input terminal on your TV.
TV
HDMI IN
ARC
HDMI cable
DVD player, etc.
OPT IN 1 OPT IN 2
IR OUT (TV)
* ARC (Audio Return Channel) : This is a function that enables output of
the TV audio from the unit by connecting only the HDMI cable.
Connecting to a TV that is not ARC compatible
Connect to your TV using an HDMI cable (commercially available).
To enable hearing of the TV audio with the unit, connect the
supplied optical digital audio cable.
OPTICAL
OUT
TV
Remove the protection cap at
the end and then connect the
cable while paying attention to
the orientation of the connector.
Optical digital
audio cable (supplied)
DVD player, etc.
OPT IN 1
IR OUT
Optical digital audio cable (commercially available)
SBX-N700/SBX-N500 Installation/Preparation and Settings
SBX-N700/SBX-N500 Installation/Preparation and Settings
For details, refer to pages 21 to 23 of the Operating Instructions
Connecting to the network via the
LAN port
You can connect to a local area network (LAN)
Check whether your TV is
from the LAN port on the rear of the unit.
ARC compatible.
For details, refer to the operating instructions
for your network device.
Check whether your TV
Use a LAN cable to connect the LAN port of
settings need to be set.
the unit to the LAN port of your modem or
router.
For the LAN cable, use a straight cable with
RJ45 connectors that is compliant with
category 5 (CAT5) or higher.
LAN(10/100) HDMI OUT(ARC)
Rear View
Connecting wirelessly
You can use an access point or wireless
router to connect the unit to the network
via a wireless LAN.
For details on connecting and the
HDMI IN
network settings, refer to the operating
instructions for your access point or
wireless router.
HDMI cable
OPT IN 2
LAN(10/100) HDMI OUT(ARC)
(TV)
Rear View
Page 6 of Operating Instructions .)
Connecting to the network
Computer
LAN(10/100)
Rear of unit
IR OUT (TV) OPT IN 1 OPT IN 2 LAN(10/100) HDMI OUT(ARC)
AC IN
Front of unit
Wireless
communication
Connect the power cords of the AV speaker
.
bar and wireless subwoofer (SBX-N700 only)
to an outlet.
Broadband
service
Insert the supplied batteries (AAA x2).
Router
Insert the batteries as indicated by the
in the battery compartment.
Computer
Con rm that "PIONEER" is displayed on the
display window of the AV bar.
SBX-N700 only
Confirm that the CONNECT indicator on the wireless
subwoofer lights blue.
Computer
* If the CONNECT indicator on the wireless subwoofer
does not light blue, perform pairing. For details, refer
Access point
to page 52 of the Operating Instructions
or
wireless router
Broadband
Please also read the instructions
service
on the back side.
Connecting the power cord
Preparing the remote control
marks
Insert the negative
end ( ) first.
Pressing the
[ STANDBY/ON] button
.