Using The Timer - Denon UD-M31 Operating Instructions Manual

10

USING THE TIMER

The time and timer functions are incorporated in the CD receiver.
Timer Settings
Types of timer operations
EVERYDAY TIMER : Use this to turn the power on and standby at the same time every day.
ONCE TIMER : Use this to turn the power on and standby once.
SLEEP TIMER : Use this to set the power to turn standby after 10 to 60 minutes, in steps of 10 minutes (operated
from the remote control unit).
Notes on timer settings
• Be sure to set the current time beforehand.
• To listen to or record a radio program ("air check") using the timer, be sure to preset the station beforehand. (Refer to
"Presetting or naming radio station" on Page 12.)
Power Failures
If the power cord is unplugged or there is a power failure, the settings of the current time and once timer are erased and
the time display will flash. If this happens, reset the current time and the once timer.
Also check the timer and tuner presettings, and reset them if they have been cleared.
Checking the Settings
To check the timer settings, press the MENU/SET button to select TIMER.
Next, press the +/– button to select EVERYDAY or ONCE TIMER, then press the MENU/SET button repeatedly to
display in order: Timer Start mode, and (when in TUNER mode) the reception band and preset channel number, Timer
On time, Timer Off time, Press the MENU/SET button again to return to the current mode display.
Changing the Settings
Repeat the timer setting operation to erase the previous settings and set the new settings.
Clearing the Settings
Press the MENU/SET button to select TIMER. Next, press the +/– button to select EVERYDAY, then press the
button for at least 2 seconds while EVERYDAY is displayed to clear the everyday timer settings.
Press the MENU/SET button to select TIMER. Next, press the +/– button to select ONCE, then press the
for at least 2 seconds while ONCE is displayed to clear the once timer settings.
Note on Setting the Timer
If the time set with the timer is reached while the system power is on, the operation switches to the operation set by
the timer.
Turning the Timer Off
Follow the steps for "to turn on or turn off EVERYDAY/ONCE timer feature" to turn off the EVERYDAY/ONCE timer
mode.
NOTES:
• The timer standby mark (" ") will not light if the current time is not set. If this is the case, set the current time,
then press the TIMER button.
• Be sure to set the power to the standby mode when using the timer.
The time is displayed in the 12-hour mode.
ON / STANDBY
Example: Setting to 9:30 p.m.
Press the MENU/SET button to select DISPLAY
1
mode.
2
Use the +/– button to set the TIME mode.
3
Press the MENU/SET button for at least 2 seconds.
2 (stop)
2 (stop) button
4
Use the +/– button to set the hours.
5
Press the MENU/SET button.
6
Use the +/– button to set the minutes.
Press the MENU/SET button at the cue of a
separate clock or time service to start the clock.
7
• The time display stops flashing and the clock
starts running.
• The current time can be set even when in STANDBY mode. Press the MENU/SET button. When the time flashes in
the display, proceed to steps 3 through 7.
Setting the Current Time
1, 3, 5, 7 2, 4, 6
CD RECEIVER UD-M31 BAND
- +
MENU / SET
TONE/SDB
VOLUME
FUNCTION
PHONES
MENU / SET
- +
(If the clock time has already been set,
that time flashes.)
MENU / SET
(If the hours have already been set, that
number flashes.)
+
-
MENU / SET
(If the minutes have already been set,
that number flashes.)
+
-
MENU / SET
The display stops flashing and the clock
starts running from 00 seconds.
ENGLISH
Flashes
Flashes
The hours place flashes.
The hours place flashes.
The minutes place flashes.
The minutes place flashes.
13