Denon UD-M31 Operating Instructions Manual page 14

ENGLISH
The power can be set to turn on and off at a specific time or at the same time everyday, in any modes: tuner, CD,
cassette deck (optional), and timer recording (recording to the cassette deck from the tuner or AUX input).
• The Timer Start mode may change depending on the SETUP functions of AUX and TAPE.
CD RECEIVER UD-M31
ON / STANDBY
1, 18
Example: Setting the tuner to turn on at 3:35pm, off at 3:56pm (with FM 92.50 MHz preset at channel 3) with
everyday timer.
Press the power operation switch to turn on the
1
system's power.
Press the MENU/SET button to set the timer setting
2
mode.
Press either the + or – button as desired.
3
• The everyday timer is selected and "EVERYDAY"
appears in the display.
4
Press the MENU/SET button.
5
Use the +/– button to set the "TUNER" mode.
6
Press the MENU/SET button.
Use the +/– button to set the preset channel
7
number.
Press the MENU/SET button.
8
• "E" and "oN" appear alternately in the display in
the steps 8 to 11.
Use the +/– button to set the hours for the timer on
9
time.
14
Setting the Timer
2, 4, 6, 8,
BAND
10, 12, 14, 16
+
-
MENU / SET
TONE/SDB
VOLUME 3, 5, 7, 9,
FUNCTION
PHONES
11, 13, 15, 17
ON / STANDBY
Say that FM 87.5 MHz is tuned in
preset channel number " 1 ".
Flashes
MENU / SET
Flashes
- +
MENU / SET
- +
MENU / SET
Flashes
+
-
Flashes
MENU / SET
(If the timer has already been set, that
number flashes.)
Flashes
- +
10
Press the MENU/SET button.
Use the +/– button to set the minutes for the timer
11
on time.
Press the MENU/SET button.
12
• "E" and "oFF" appear alternately in the display in
the steps 12 to 15.
Use the +/– button to set the hours for the timer off
13
time.
14
Press the MENU/SET button.
Use the +/– button to set the minutes for the timer
15
off time.
16
Press the MENU/SET button.
✽
Use the +/– button to select "E oN".
17
• The mark lights.
Press the power operation switch to turn standby
the system's power.
18
• The power switch indicator turns orange and
display turns off.
✽ Turning on and off the timer standby ON/OFF
• In TIMER STANDBY mode, each time the +/– button is pressed, the setting changes as follows;
1 oN/E oN:
Both once and everyday timers are activated. (The
Flashes
1_ _/E oN: Only the everyday timer is activated. (The
1 oN/E _ _:
Only the once timer is activated. (The
Flashes
1 _ _/E _ _: Both timers are canceled. (The
• When you set only the everyday timer, the indication changes between 1 _ _/E _ _ and 1 _ _/E oN.
• When you set only the once timer, the indication changes between 1 _ _/E _ _ and 1 oN/E _ _.
• When you complete the setting, the display automatically returns to the former state after 4 seconds.
• To change the settings of TIMER STANDBY, press MENU/SET button to set the unit in TIMER STANDBY mode first,
then use +/- button to make changes.
Flashes Flashes
MENU / SET
(If the timer has already been set, that
number flashes.)
Flashes Flashes
- +
Flashes Flashes
MENU / SET
Flashes Flashes
+
-
Flashes Flashes
MENU / SET
(If the timer has already been set, that
number flashes.)
Flashes Flashes
- +
(If the timer has already been set, that
number flashes.)
MENU / SET
The display returns to as it was before
the timer setting mode was set.
Lights
- +
ON / STANDBY
mark lights.)
mark lights.)
mark lights.)
mark turns off.)