Denon UD-M31 Operating Instructions Manual page 8

ENGLISH
(2) Rear Panel
!4
AM antenna terminal
(ANTENNA TERMINAL AM)
• Connect the AM antenna here.
!5
FM antenna terminal
(ANTENNA TERMINAL FM)
• Connect the FM antenna here.
!6
Digital output jack
(DIGITAL OPTICAL OUT)
• Digital data is output in optical form from this jack.
!7
System connectors
(SYSTEM CONNECTOR 1 and 2)
• When connecting the D-M31 series in a system,
connect these connectors to system connectors
on other system components.
(Use the system cords included with the other
components.)
!8
Speaker terminals (SPEAKERS)
• Use these to connect the speakers.
!9
AC OUTLET
• Use this when using this unit with the D-M31
series.
For connections, refer to "CONNECTIONS".
(100 W MAX.)
@0
Power cord
• Plug this cord into a wall power outlet.
@1
PRE OUT terminal (SUB WOOFER)
• Connector jack for subwoofer with built-in
amplifier (super woofer), etc.
@2
Analog output jacks
• This is an output terminal for recording.
@3
Analog input jacks
8
(3) Display
The selected functions, volume, reception band, reception
frequency, time, and timer settings are displayed here.
The following is displayed in the track number display in CD
mode:
• When the disc's data cannot be read properly ............00
• In stop mode ...........................Total number of tracks
• In play and program modes .....................Track number
The following is displayed in the time display in CD mode:
• When the disc's data cannot be read ..................00:00
• In stop mode .................................Total playing time
• In play and pause modes ...Elapsed time for current track
"P.SET" lights when The timer will
the tuner preset operate when
number is displayed. this is lit.
This lights when
setting the timer.
"TIMER" lights when
the timer is set.
This lights when the "RANDOM" lights
during random play.
display is set to
clock mode.
(the play indicator) lights
1
when a disc is playing, and This flashes for approximately
(the pause indicator) 10 seconds when the
3
lights when pause mode is MEMORY button is pressed
set. while presetting stations.
This changes as follows each time the REPEAT button is pressed:
1st press : RPT 1 (single-track repeat) is displayed and the number
2nd press : RPT ALL (1 disc all track repeat) is displayed.
3rd press : Nothing is displayed.
NOTE:
• The timer standby mark (" ") does not light if the current time and the timer have not been set.
These display the FM reception mode.
ST : This lights when a stereo program is
received in the FM AUTO mode.
MONO: This lights when a monaural program is
received in the FM AUTO mode and when
the BAND button is pressed, setting the
FM MONO mode.
AUTO : This lights when the BAND button is
pressed, setting the FM AUTO mode.
This lights when the
This lights when
tone has been
a station is tuned
adjusted or when in
in properly.
the tone adjustment
standby mode.
This lights when
SDB mode is on.
"PROG" lights during
programmed playback.
"EDIT" lights when
editing cassette tapes.
This lights when the sleep
timer is operating.
Flashes when remote
control signals are received.
of the track to be repeated on the display.