Map Page - Garmin GPS 76 Owner's Manual

Getting Started Reference

Map Page

User Selectable Data Fields
Zoom Scale
26 26
Map Page
The GPS 76 comes with a factory-loaded marine point database that includes
marine navaids and major cities. This can be replaced with marine navaids, cities,
and points of interest using GARMIN MapSource products.
Changing the Zoom Scale
You can change the Zoom Scale on the Map Page allowing you to either view
a smaller area in greater detail or a larger area with less detail. As referred to
in this manual, when you decrease the Zoom Scale you will view a smaller area
with greater detail. The current Zoom Scale setting is displayed in the lower left
corner of the Map Page. If 'Overzoom' is displayed under the scale, no further
map information is available.
To change the Zoom Scale:
1. Press the IN Key to decrease the Zoom Scale.
2. Press the OUT Key to increase the Zoom Scale.
Map Page Options
To access the Map Page Options, with the Map Page displayed, press the
MENU Key. To select an option from the Menu, highlight the desired selection
then press ENTER.
Full Screen Map — This option hides the data fi elds and expands the map to
include the entire display. When 'Full Screen Map' is selected the option will
change to 'Show Data Fields'.
Measure Distance — This option will allow you to measure the distance
between two points. As you move the Map Pointer, the Distance, Bearing and
Location of the Pointer are displayed at the top of the map. To measure the
distance between to map points, press ENTER to set a reference, then move
the Map Pointer to the other location. The Bearing, and Distance are displayed
below the data fi elds.