Table of Contents
Advertisement
Map Page Settings
From the map, select
Stop Navigation: Stops navigating the current route.
Map Setup: Enables you to open additional map settings
Measure Distance: Allows you to measure the distance between multiple locations
Map,
page 13).
Restore Defaults: Restores the map to factory default settings.
Map Settings
From the map, select
Configure Maps: Enables or disables the maps currently loaded on the device
Orientation: Adjusts how the map is shown on the page
Dashboard: Sets a dashboard to display on the map. Each dashboard shows different information about your
route or your location.
Guidance Text: Sets when the guidance text is shown on the map.
Advanced Setup: Enables you to open advanced map settings
Advanced Map Settings
From the map, select
Auto Zoom: Automatically selects the appropriate zoom level for optimal use on your map. When Off is
selected, you must zoom in or out manually.
Detail: Selects the amount of detail shown on the map. Showing more detail may cause the map to redraw more
slowly.
Shaded Relief: Shows detail relief on the map (if available) or turns off shading.
Vehicle: Sets the position icon, which represents your position on the map. The default icon is a small blue
triangle.
Zoom Levels: Adjusts the zoom level at which map items appear. The map items do not appear when the map
zoom level is higher than the selected level.
Text Size: Selects the text size for map items.
Map Speed: Adjusts the speed at which the map is drawn. A faster map drawing speed decreases the battery
life.
Changing the Map Orientation
1 From the map, select
2 Select Map Setup > Orientation.
3 Select an option:
• Select North Up to show north at the top of the page.
• Select Track Up to show your current direction of travel at the top of the page.
• Select Automotive Mode to show an automotive perspective with the direction of travel at the top.
Measuring Distance on the Map
You can measure the distance between two locations.
1 From the map, select a location.
2 Select
> Measure Distance > Start > Use.
3 Move the pin to another location on the map.
Compass
When navigating,
points to your destination, regardless of the direction you are moving. When
toward the top of the electronic compass, you are traveling directly toward your destination. If
other direction, turn until it points toward the top of the compass.
Viewing the Main Pages
.
, and select Map Setup.
, and select Map Setup > Advanced Setup.
.
(Map Settings,
page 13).
(Enabling Maps,
(Changing the Map Orientation,
(Advanced Map Settings,
(Measuring Distance on the
page 43).
page 13).
page 13).
points
points any
13
Advertisement
Table of Contents
