On-Screen Displays And Data Code; Using Headphones - Canon Legira FS 20 Instruction Manual

NOTES
• When you apply a fader, not only the
picture but also the sound will fade in or
out. When you apply an effect, the
sound will be recorded normally.
• The camcorder retains the last setting
used even if you turn off the digital
effects or change the recording
program.

On-Screen Displays and Data Code

With every scene or photo recorded,
the camcorder keeps a data code that
includes the date, time and information
about the camera setup at the time of
recording. While viewing a photo, all the
data is displayed in the form of
information icons. During movie
playback you can select what to display
with the [DATA CODE] setting (
You can also turn most on-screen
displays on or off.
Repeatedly press
on-screen displays on/off in the
following sequence:
, mode:
• All displays on
• Most displays off*
86).
DISP.
to turn the
mode:
• All displays on
• Data code only
• All displays off
mode:
• All displays on
• Regular displays only (removes the
histogram and information icons)
• All displays off
* The following icons will appear even when
all other on-screen displays are turned off:
The icons and
icon and AF frames when the autofocus
is locked (in mode), screen markers
(both recording modes).

Using Headphones

Use headphones for playback or to
check the audio level while recording.
The headphones are connected to the
AV OUT/ H terminal, which is used for
both the headphones and the audio/
video output. Before connecting the
headphones, follow the procedure
below to change the function of the
terminal from AV output to
(headphones) output.
*
* If recording in
terminal's setting and headphone volume in
advance.
FUNC.
[ MENU]
[ SYSTEM SETUP]
[AV/PHONES]
FUNC.
(in mode), the
( 23)
mode, change the
[PHONES]
51